We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Chrome-finish wheel stud installer kit with M12x1.25 thread, shown assembled

V-Project Inc

V-Project Inc Wheel Stud Installer Kit Nissan D21 2009-2014 M12x1.25

SKU CH-QWBG-42XGE

Installs M12x1.25 wheel studs on Nissan D21 models from 2009 to 2014 using the included chrome tools

  • Colorchrome
  • Commercial/ResidentialResidential
  • Designed for Nissan D21 models from 2009 to 2014
  • M12 x 1.25 thread matches factory wheel studs
  • Kit includes installer tools for pin-type studs
  • Chrome finish resists corrosion during use
  • Compact dimensions of 20 mm by 24.9 mm by 43.15 mm

Nissan D21 Wheel Stud Installer

This kit supplies the tools needed to press new M12x1.25 pin studs into the hub of a 2009 to 2014 Nissan D21. It targets DIY owners and independent shops that replace worn or broken wheel studs without removing the hub assembly. The components are sized for the factory thread pitch and stud type listed for this application.

Chrome-Finish Tool Construction

Each piece in the set carries a chrome coating that resists corrosion during storage and repeated use in a residential garage. The kit includes the installer nut and sleeve dimensions of 20 mm by 24.9 mm by 43.15 mm, which correspond to 0.787 inch by 0.980 inch by 1.698 inch. These tolerances let the tool engage the pin stud squarely so the new stud draws in straight.

Replaces Hammer-And-Drift Method

The installer replaces the improvised approach of driving studs with a hammer and drift, which can damage threads or seat the stud unevenly. The jump is worth it whenever a wheel stud snaps or strips on the D21 and the hub stays on the vehicle. It is not suited for presses that require a different thread pitch or for applications using press-in studs with a larger shank diameter.

Highlights

  • Designed for Nissan D21 models from 2009 to 2014
  • M12 x 1.25 thread matches factory wheel studs
  • Kit includes installer tools for pin-type studs
  • Chrome finish resists corrosion during use
  • Compact dimensions of 20 mm by 24.9 mm by 43.15 mm

Specifications

Brandv-project
Colorchrome
Commercial/ResidentialResidential

Questions about this item

What thread size does the M12x1.25 kit use for the wheel studs?

The kit uses an M12 x 1.25 thread pitch, matching the factory specification for the listed Nissan D21 applications.

What are the physical dimensions of the installer components?

The components measure 20 mm by 24.9 mm by 43.15 mm, or 0.787 inch by 0.980 inch by 1.698 inch, for a compact fit in the hub area.

How do I use the tool to press in new pin-type studs without damaging the hub?

Place the installer over the stud, thread the supplied nut onto the stud, and tighten gradually to draw the stud straight into the hub flange.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.