We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Chrome wheel stud installer kit with three stepped cylindrical pieces on a dark surface

V-Project Inc

V-Project Inc Wheel Stud Installer Kit Mazda CX-3 M12x1.5 Chrome

SKU CH-JQXK-Y8P88

Installs M12x1.5 wheel studs on Mazda CX-3 and many Toyota, Lexus and Mazda models

  • Colorchrome
  • Commercial/ResidentialResidential
  • Installs Mazda CX-3 wheel studs securely using M12x1.5 thread specification
  • Chrome finish resists corrosion for long-lasting durability
  • Compact 20mm x 24.9mm x 43.15mm design fits tight wheel hub spaces
  • Purpose-built for pin-type studs ensuring correct engagement
  • Covers extensive Mazda range including CX-3, CX-5, MX-5, and rotary models

Mazda CX-3 M12x1.5 wheel stud installer

This kit provides the tools needed to install M12x1.5 wheel studs on the Mazda CX-3. It suits DIY mechanics and independent garages performing brake or hub work. The components are finished in chrome for corrosion resistance during residential use.

Replaces improvised press methods

Using a proper installer prevents damage to new studs and hub threads compared to hammering or makeshift hardware. The upgrade is worth it whenever you are replacing broken or stripped studs on this thread size. It ensures the stud seats squarely without mushrooming the tip.

Handles M12x1.5 pin-type studs on listed Mazda

The kit fits the CX-3 and other Mazda vehicles sharing the M12x1.5 thread pitch and pin-stud design. It runs out when the application calls for a different thread diameter, a press-in knurl pattern, or a commercial-grade throughput requirement.

Highlights

  • Installs Mazda CX-3 wheel studs securely using M12x1.5 thread specification
  • Chrome finish resists corrosion for long-lasting durability
  • Compact 20mm x 24.9mm x 43.15mm design fits tight wheel hub spaces
  • Purpose-built for pin-type studs ensuring correct engagement
  • Covers extensive Mazda range including CX-3, CX-5, MX-5, and rotary models

Specifications

Brandv-project
Colorchrome
Commercial/ResidentialResidential

Questions about this item

Will the 20 mm x 24.9 mm x 43.15 mm installer fit the M12x1.5 thread on my Mazda CX-3?

Yes, the kit is built for M12x1.5 pin studs and the dimensions match the Mazda CX-3 application listed.

What is the correct way to press the new studs in without damaging the hub?

Thread the supplied nut onto the stud, tighten gradually with a socket until the stud seats fully, then remove the nut — do not use an impact gun for the final seating.

When should I replace the chrome installer nuts after repeated use?

Replace them once the internal threads show wear or the chrome finish flakes, which can cause uneven clamping force on new studs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.