We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Chrome wheel stud installer kit with three threaded components for Lexus LX 450

V-Project Inc

V-Project Inc Wheel Stud Installer Kit m12x1.5 Lexus LX 450 1996-1997

SKU CH-302C-5845M

Installs M12×1.5 pin studs on Lexus LX 450 1996-1997 with 20 mm, 24.9 mm and 43.15 mm components

  • Colorchrome
  • Commercial/ResidentialResidential
  • Designed for Lexus LX 450 1996-1997 fitment
  • m12 x 1.5 thread matches factory wheel studs
  • Compact 20mm x 24.9mm x 43.15mm dimensions allow tight access
  • Chrome finish resists corrosion during repeated use
  • Pin-stud compatible design ensures proper installation alignment

Target Fitment

This wheel stud installer kit is built for the Lexus LX 450 from 1996 and 1997. The thread specification is m12 x 1.5 and the tool works with pin-style studs. It suits DIY owners and residential mechanics who need to replace pressed-in wheel studs on this specific vehicle.

Durable Chrome Finish

The components are chrome plated for corrosion resistance and surface hardness during repeated use. Critical dimensions are 20 mm by 24.9 mm by 43.15 mm, matching the factory stud geometry. The kit contains only the mechanical hardware required for the installation task.

Replaces Damaged Factory Studs

This kit replaces factory wheel studs that have been stripped, broken or stretched beyond safe clamping force. It is not intended for vehicles outside the listed Lexus application or for thread pitches other than m12 x 1.5. Buyers needing different thread sizes or press-in diameters should verify compatibility before purchasing.

Highlights

  • Designed for Lexus LX 450 1996-1997 fitment
  • m12 x 1.5 thread matches factory wheel studs
  • Compact 20mm x 24.9mm x 43.15mm dimensions allow tight access
  • Chrome finish resists corrosion during repeated use
  • Pin-stud compatible design ensures proper installation alignment

Specifications

Brandv-project
Colorchrome
Commercial/ResidentialResidential

Questions about this item

How do I install the m12x1.5 wheel studs on my Lexus LX 450 without damaging the threads?

Thread each new stud by hand until the m12x1.5 pitch engages smoothly, then use the installer nut to draw it fully into the hub; forcing it with an impact gun cross-threads the 1.5 mm pitch.

What maintenance will the chrome finish on these 20 mm studs require over time?

Clean road salt off the chrome surfaces after winter driving and apply a light coat of anti-seize to the threads during every tyre rotation to prevent galling.

At what point does the 24.9 mm shoulder length limit how far the stud can be pressed into the hub?

The 24.9 mm shoulder bottoms out against the hub face, so the stud cannot seat deeper once that surface makes full contact.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.