We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Chrome wheel stud installer kit with three cylindrical pieces of varying lengths

V-Project Inc

V-Project Inc Wheel Stud Installer Kit M12x1.5 Chrome Mitsubishi Montero 1983-2006

SKU CH-SWN3-VFFAD

Installs M12 x 1.5 chrome wheel studs on Mitsubishi Montero models from 1983 to 2006

  • Colorchrome
  • Commercial/ResidentialResidential
  • Designed for Mitsubishi Montero 1983-2006 fitment
  • M12 x 1.5 thread matches factory wheel studs
  • Chrome finish resists corrosion during repeated use
  • 20 mm x 24.9 mm x 43.15 mm compact dimensions allow tight-hub access
  • Pin-stud installer design speeds up stud replacement tasks

Product Identity

The V-Project Inc wheel stud installer kit provides the tools needed to press M12x1.5 pin-type studs into hubs on Mitsubishi Montero models from 1983 through 2006. The chrome-finished components are sized for residential garage use and match the factory thread specification for those vehicles.

Installation Dimensions

The kit includes pieces measuring 20 mm by 24.9 mm by 43.15 mm, or 0.787 inch by 0.980 inch by 1.698 inch, giving the reach and clearance required for the Montero hub pattern. These dimensions determine whether the tool clears the flange and drives the stud fully home without binding.

Fitment Decider

The defining specification is the M12x1.5 thread pitch combined with the pin-stud design; only hubs using that exact thread and stud type will accept the hardware this kit installs. Buyers whose vehicles use a different thread size or a press-in stud without a pin cannot use this set.

Highlights

  • Designed for Mitsubishi Montero 1983-2006 fitment
  • M12 x 1.5 thread matches factory wheel studs
  • Chrome finish resists corrosion during repeated use
  • 20 mm x 24.9 mm x 43.15 mm compact dimensions allow tight-hub access
  • Pin-stud installer design speeds up stud replacement tasks

Specifications

Brandv-project
Colorchrome
Commercial/ResidentialResidential

Questions about this item

How do I install the M12x1.5 wheel stud installer on a 1983-2006 Mitsubishi Montero?

Thread the installer onto the hub's M12x1.5 threads, then tighten the nut to press the pin stud into place; the step often missed is verifying the 20mm, 24.9mm and 43.15mm dimensions align before applying full torque.

What maintenance or replacement will the chrome M12x1.5 installer kit need later?

Inspect the chrome finish for flaking and the threads for galling after each use; replace the kit if the 1.5mm pitch threads show deformation or the 0.787in, 0.980in, 1.698in profiles no longer seat squarely on the pin studs.

What limit appears first when using the V-Project installer repeatedly on M12x1.5 pin studs?

The chrome coating on the 20mm, 24.9mm and 43.15mm contact surfaces wears first, reducing corrosion resistance and allowing the 1.5mm pitch threads to gall under sustained tightening force.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.