We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Chrome wheel stud installer kit with three cylindrical tools in graduated lengths

V-Project Inc

V-Project Inc Wheel Stud Installer Kit M12x1.5 Chrome Mitsubishi Galant VR4 1989-2012

SKU CH-N7GC-FDCB6

M12x1.5 chrome installer kit for pin wheel studs fits Mitsubishi Galant VR4 1989-2012

  • Colorchrome
  • Commercial/ResidentialResidential
  • Designed for Mitsubishi Galant VR4 1989-2012 applications
  • M12 x 1.5 thread matches factory wheel studs
  • Chrome finish resists corrosion during repeated use
  • Compact 20mm x 24.9mm x 43.15mm size fits tight hub spaces
  • Works with pin-type studs on listed Acura, Honda, Ford models

Wheel Stud Installer Kit M12x1.5

The V-Project Inc kit supplies the tools required to press new M12 x 1.5 wheel studs into hubs on a Mitsubishi Galant VR4 from 1989 to 2012. Chrome-finished components resist corrosion during residential garage use. The set targets DIY owners replacing worn or broken pin-type studs without a hydraulic press.

Fits Galant VR4 and many other makes

The application list covers Acura, Chevrolet, Chrysler, Dodge, Eagle, Ford, Honda and Hyundai models spanning 1986 to 2018. Builders working on vehicles outside this range or using a different thread pitch should source a dedicated kit. Shops needing high-volume press equipment will find this residential set insufficient.

Thread size M12 x 1.5 decides fitment

Only hubs drilled for M12 x 1.5 pin studs accept these installer adapters; any other diameter or pitch makes the kit unusable. The critical dimensions are 20 mm, 24.9 mm and 43.15 mm overall length. Verify the vehicle hub specification before purchase to avoid mismatched hardware.

Highlights

  • Designed for Mitsubishi Galant VR4 1989-2012 applications
  • M12 x 1.5 thread matches factory wheel studs
  • Chrome finish resists corrosion during repeated use
  • Compact 20mm x 24.9mm x 43.15mm size fits tight hub spaces
  • Works with pin-type studs on listed Acura, Honda, Ford models

Specifications

Brandv-project
Colorchrome
Commercial/ResidentialResidential

Questions about this item

Will the M12 x 1.5 thread size match the wheel studs already on my Mitsubishi Galant VR4?

Yes, the kit is built for M12 x 1.5 threads which are the standard size on the Galant VR4 from 1989 through 2012.

Can I reuse the same installer nuts when I later replace the original pin-type studs with new ones of the same design?

The installer nuts are made for pin-type studs, so they will work with any replacement studs that share the same pin configuration and M12 x 1.5 thread.

How do I confirm the installer is fully seated after I tighten the nut onto the new stud?

When the nut bottoms out against the hub flange and the stud shoulder sits flush with the rotor surface, the 43.15 mm overall length shows the stud is fully installed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.