We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Chrome wheel stud installer kit for Mitsubishi EVO 10, three cylindrical tools with threaded ends

V-Project Inc

V-Project Inc Wheel Stud Installer Kit M12x1.5 Chrome Mitsubishi EVO 10 2008-2015

SKU CH-GH7F-BD3QQ

Installs M12x1.5 pin studs on Mitsubishi EVO 10 models from 2008 to 2015 using the included chrome tools

  • Colorchrome
  • Commercial/ResidentialResidential
  • Designed for Mitsubishi EVO 10 2008-2015 fitment
  • M12 x 1.5 thread matches factory studs
  • Chrome finish resists corrosion during installation
  • Compact 20mm x 24.9mm x 43.15mm dimensions
  • Pin-stud tool type speeds wheel changes

Mitsubishi EVO 10 Wheel Stud Installer

This chrome-finished tool kit is built for M12 x 1.5 pin-type wheel studs on the Mitsubishi EVO 10 from 2008 to 2015. The set includes the installer nut and hardware needed to press new studs into the hub without damaging threads. Dimensions are 20 mm by 24.9 mm by 43.15 mm for a precise fit. It is a dedicated service tool for professional technicians and experienced home mechanics.

Replaces makeshift press methods

Using a proper installer nut eliminates the risk of cross-threading or stretching studs that can occur when tightening wheels to draw studs in. The jump is worth it whenever original studs are stripped, broken or upgraded to aftermarket pins. Correct installation torque is maintained because the stud seats fully and squarely against the hub flange.

Suits EVO 10 owners doing brake or hub work

Buyers who service other vehicles listed in the wide application range can also use the kit, as the thread pitch matches many Japanese and domestic models. Those needing a different thread size, a bulk pack of replacement studs, or a hydraulic press for high-volume shops should look at something else.

Highlights

  • Designed for Mitsubishi EVO 10 2008-2015 fitment
  • M12 x 1.5 thread matches factory studs
  • Chrome finish resists corrosion during installation
  • Compact 20mm x 24.9mm x 43.15mm dimensions
  • Pin-stud tool type speeds wheel changes

Specifications

Brandv-project
Colorchrome
Commercial/ResidentialResidential

Questions about this item

Will the M12x1.5 thread size match my Mitsubishi EVO 10 wheel studs?

Yes, the kit uses M12x1.5 threads which are the correct specification for the EVO 10 models from 2008 to 2015.

How do I use the installer nut and press plate without damaging the new studs?

Thread the installer nut onto the new stud, place the press plate against the hub, then tighten the nut to pull the stud through; do not use an impact gun.

When should I replace the chrome installer nut if the threads start to wear?

Replace the installer nut when the internal threads no longer grip the M12x1.5 studs cleanly or if the chrome coating flakes and causes binding.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.