We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Chrome wheel stud installer kit with M12x1.5 threads for Honda City 2010-2016

V-Project Inc

V-Project Inc Wheel Stud Installer Kit M12x1.5 Chrome Honda City 2010-2016

SKU CH-QSRC-YG0R4

Installs M12x1.5 pin studs on 2010-2016 Honda City using 20 mm, 24.9 mm and 43.15 mm chrome tools

  • Colorchrome
  • Commercial/ResidentialResidential
  • Designed for Honda City 2010-2016 fitment
  • M12 x 1.5 thread matches factory spec
  • Chrome finish resists corrosion during use
  • 20 mm x 24.9 mm x 43.15 mm compact tool size
  • Works with pin-type wheel studs

Wheel Stud Installer Kit for Honda City 2010-2016

This wheel stud installer kit is designed for residential use on Honda City models from 2010 to 2016. It targets DIY mechanics and home garage owners who need to replace pressed-in pin studs with M12 x 1.5 threads. The chrome-finished components provide corrosion resistance during installation and service life.

M12 x 1.5 Thread Engagement Under Load

The installer applies steady force to seat pin studs into the hub flange without impact shock that can damage wheel bearings. Its 20 mm, 24.9 mm and 43.15 mm contact surfaces distribute pressure evenly across the stud shoulder and hub face during the press operation. This controlled engagement prevents stud walk-out or cross-threading when tightening lug nuts to specification.

Chrome Finish Durability in Service

The chrome coating resists rust and galling during repeated use in typical garage environments. No lubrication is required between the tool and new studs, reducing contamination of brake surfaces. The kit adds negligible weight to a tool chest and stores flat, drawing no power and producing no noise during operation.

Highlights

  • Designed for Honda City 2010-2016 fitment
  • M12 x 1.5 thread matches factory spec
  • Chrome finish resists corrosion during use
  • 20 mm x 24.9 mm x 43.15 mm compact tool size
  • Works with pin-type wheel studs

Specifications

Brandv-project
Colorchrome
Commercial/ResidentialResidential

Questions about this item

Does the M12x1.5 thread size match the factory studs on a 2010-2016 Honda City?

Yes, the kit uses M12 x 1.5 threads which are the correct specification for the 2010-2016 Honda City.

What tools do I need to use this wheel stud installer kit?

You will need standard hand tools such as a lug wrench or impact socket to remove the wheel and a press or hammer to install the new studs using the kit.

Will the 20mm, 24.9mm and 43.15mm dimensions fit the hub on my older 2006 Honda Civic?

The kit is listed for 1986-2018 Civics, so the M12 x 1.5 thread and dimensions are compatible with the 2006 model hub.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.