We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Chrome wheel stud installer kit with multiple metal components in silver finish

V-Project Inc

V-Project Inc Wheel Stud Installer Kit M12x1.5 Chrome For Lexus NX300h

SKU CH-3YKG-S16T9

Installs M12x1.5 wheel studs on Lexus NX300h and many Toyota, Lexus and Mazda models

  • Colorchrome
  • Commercial/ResidentialResidential
  • Fits Lexus NX300h and many Toyota models
  • M12 x 1.5 thread matches factory studs
  • Chrome finish resists corrosion during installation
  • Compact 20mm x 24.9mm x 43.15mm size reaches tight hubs
  • Includes nut kit for pin-type wheel studs

Lexus NX300h M12x1.5 Stud Installer

This chrome wheel-stud installer kit fits Lexus NX300h models and uses M12x1.5 threads for pin-type studs. It provides the specific tooling needed to press new studs into the hub without damaging surrounding components. The kit suits DIY owners and independent mechanics handling hub maintenance on this vehicle.

Replaces Damaged Or Stripped Factory Studs

Use the kit when original studs are stretched, cross-threaded or sheared off during wheel changes. The M12x1.5 thread matches the factory specification so the repair restores the correct clamping force. The jump is worth it whenever a hub still has good bearing life but needs fresh studs for safe wheel retention.

Verify Hub Thread Pitch

Confirm the vehicle uses M12x1.5 pin studs rather than a different thread or press-in style. Check that the hub bore and flange thickness allow the 20 mm by 24.9 mm by 43.15 mm tool dimensions to engage fully. Ensure you have a suitable press or driver to apply the required installation force.

Highlights

  • Fits Lexus NX300h and many Toyota models
  • M12 x 1.5 thread matches factory studs
  • Chrome finish resists corrosion during installation
  • Compact 20mm x 24.9mm x 43.15mm size reaches tight hubs
  • Includes nut kit for pin-type wheel studs

Specifications

Brandv-project
Colorchrome
Commercial/ResidentialResidential

Questions about this item

What thread size do the wheel studs in this kit use?

The kit uses M12 x 1.5 thread size studs designed for pin-type wheel studs on the Lexus NX300h and other listed vehicles.

How do you install the wheel studs with this tool, and what step is often missed?

Insert the installer tool over the new stud, thread the supplied nut onto the stud, and tighten until the stud seats fully in the hub; the step often missed is confirming the stud is completely flush before removing the tool.

When should the chrome finish on these installer components be inspected or replaced?

Inspect the chrome surfaces for flaking or corrosion before each use; replace any piece that shows worn plating to prevent damage to new wheel studs during installation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.