We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Chrome wheel stud installer kit with three threaded components M12x1.5 20mm length

V-Project Inc

V-Project Inc Wheel Stud Installer Kit M12x1.5 Chrome 20mm

SKU CH-2FC9-C59P6

Installs M12×1.5 wheel studs on Acura, Honda, Ford and other listed vehicles with 20 mm chrome tools

  • Colorchrome
  • Commercial/ResidentialResidential
  • Fits Acura Vigor 1992-1994 wheel studs
  • M12 x 1.5 thread matches factory specs
  • Chrome finish resists corrosion during installs
  • 20 mm stud length suits pin-type studs
  • Compact 24.9 x 43.15 mm body fits tight hubs

Wheel Stud Installer Kit M12x1.5

This V-Project Inc kit supplies the tools needed to install M12x1.5 wheel studs on compatible vehicles. The chrome-finished components are built for residential garage use and match the 20 mm thread length specified for the listed applications.

Fits Acura Vigor 1992-1994 and many other models

The kit covers a wide range of Honda, Acura, Ford, Chevrolet, Chrysler, Dodge, Eagle, Hyundai and Daewoo models from 1986 through 2018. Builders working on vehicles outside this list or using a different thread pitch should look for a kit that matches their specific hub specifications.

Thread size M12x1.5 with 20 mm length

The decisive specification is the M12x1.5 thread combined with a 20 mm stud length. Only wheels and hubs designed for this exact pitch and length will install correctly with the supplied hardware.

Highlights

  • Fits Acura Vigor 1992-1994 wheel studs
  • M12 x 1.5 thread matches factory specs
  • Chrome finish resists corrosion during installs
  • 20 mm stud length suits pin-type studs
  • Compact 24.9 x 43.15 mm body fits tight hubs

Specifications

Brandv-project
Colorchrome
Commercial/ResidentialResidential

Questions about this item

How do I install the M12x1.5 wheel studs using the 20mm installer kit without damaging the threads?

Thread the installer onto the new stud by hand until the 20mm chrome body seats flush, then tighten with a socket while holding the hub steady so the 1.5mm pitch engages cleanly.

What maintenance does the chrome finish on the 20mm x 24.9mm x 43.15mm installer require after repeated use?

Wipe the chrome surfaces with a clean rag and light oil after each job to prevent corrosion on the 0.787 inch and 0.980 inch contact faces.

At what point does the 1.698 inch overall length of the installer limit leverage when pressing in stubborn pin studs?

The 43.15mm length restricts leverage on seized studs; if the tool bottoms out before the stud seats, use a press rather than forcing the kit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.