V-Project Inc Wheel Stud Installer Kit M12x1.5 Acura RSX 2002-2006

M12 x 1.5 thread kit for Acura RSX 2002-2006

This V-Project Inc wheel-stud installer kit fits Acura RSX models from 2002 through 2006 and other vehicles using M12 x 1.5 pin-type studs. The set includes the tools and nuts needed to press new studs into the hub without removing the bearing assembly. It is aimed at DIY owners and independent shops that service Honda-platform cars with this thread pitch.

Replaces hammer-and-drift methods on pin studs

The kit upgrades the traditional approach of driving studs with a hammer and drift, which can damage threads or distort the hub flange. The jump is worth it whenever a broken or stripped stud must be replaced on a vehicle listed in the application range, especially Acura RSX 2002-2006, because the installer applies even force through the included nut and spacer. It does not suit vehicles that use press-in studs with a different thread size or spline pattern.

Fits in a standard tool drawer

The components measure 20 mm by 24.9 mm by 43.15 mm, so the kit stores easily beside other wheel-service tools. No hydraulic press or oversized sockets are required, freeing up bench space and reducing the time the vehicle spends on the lift. Builders who need to service bolt-in studs or larger commercial wheel bolts will need a different installer.