We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Chrome wheel stud installer kit with threaded components for Nissan Leaf 2011-2017

V-Project Inc

V-Project Inc Wheel Stud Installer Kit m12x1.25 Chrome Nissan Leaf 2011-2017

SKU CH-5VP0-0CN0K

Wheel stud installer kit fits Nissan Leaf 2011-2017 with m12x1.25 thread size

  • Colorchrome
  • Commercial/ResidentialResidential
  • Designed for Nissan Leaf 2011-2017 fitment
  • M12 x 1.25 thread matches factory wheel studs
  • Chrome finish resists corrosion during installation
  • Compact 20 mm x 24.9 mm x 43.15 mm tool fits tight hub spaces
  • Works with pin-type studs on multiple Nissan and Infiniti models

M12 x 1.25 thread installer

This kit fits Nissan Leaf models from 2011 to 2017 and other vehicles sharing the M12 x 1.25 pin-stud pattern. It provides the hardware needed to press or draw replacement studs into the hub without damaging the threads. The chrome finish resists corrosion during storage and use. DIY owners and shops can complete stud changes with common hand tools.

Chrome finish resists shop wear

The chrome coating protects the installer surfaces from rust and galling when the tool is used repeatedly. No power draw, noise or thermal output is produced because the kit is entirely mechanical. Normal use involves tightening a nut against the installer to seat the stud, which requires only hand or impact force. There are no moving parts that generate heat.

Compact dimensions for tight hubs

The three critical lengths are 20 mm, 24.9 mm and 43.15 mm, allowing the tool to reach recessed stud holes on the listed Nissan and Infiniti models. Chrome surfaces wipe clean after exposure to brake dust or road salt. The kit is sized for residential garage use and fits in a standard socket tray. Builders needing a different thread pitch or larger commercial-grade tooling will need a separate set.

Highlights

  • Designed for Nissan Leaf 2011-2017 fitment
  • M12 x 1.25 thread matches factory wheel studs
  • Chrome finish resists corrosion during installation
  • Compact 20 mm x 24.9 mm x 43.15 mm tool fits tight hub spaces
  • Works with pin-type studs on multiple Nissan and Infiniti models

Specifications

Brandv-project
Colorchrome
Commercial/ResidentialResidential

Questions about this item

How do I install the m12x1.25 studs on my 2011-2017 Nissan Leaf and what step is commonly missed?

Thread the installer tool onto the new stud, tighten until the stud seats fully in the hub flange, then remove the tool before torquing the lug nut; skipping the tool-removal step leaves the stud loose.

What maintenance or replacement will the chrome-finish installer tool need over time?

Wipe threads clean after each use and apply light oil to prevent chrome flaking; replace the tool if the internal threads show wear that prevents full stud engagement.

What limit appears first when using this kit repeatedly on m12x1.25 pin studs?

The installer tool’s internal threads wear before the studs do, causing incomplete seating after many installations.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.