We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Chrome wheel stud installer kit with threaded components and hardware in a storage case

V-Project Inc

V-Project Inc Wheel Stud Installer Kit M1/2 x 20 Half-20 Chrome Jeep Grand Cherokee 1993-2010

SKU CH-MW3E-DTW42

Installs M1/2 x 20 wheel studs on Jeep Grand Cherokee 1993-2010 and other listed vehicles

  • Colorchrome
  • Commercial/ResidentialResidential
  • Fits Jeep Grand Cherokee 1993-2010 wheel studs
  • M1/2 x 20 thread matches factory specification
  • Chrome finish resists corrosion during installation
  • 20 mm x 24.9 mm x 43.15 mm tool engages pin studs securely
  • Works across Chevrolet, Dodge, Ford, Jaguar, Mercury, Mustang, Pontiac models

Vehicle Application

This wheel stud installer kit fits Jeep Grand Cherokee models from 1993 to 2010 and also covers a wide range of Chevrolet, Dodge, Ford, Jaguar, Mercury, Mustang and Pontiac vehicles listed in the specifications. It is designed for residential use by owners or mechanics who need to replace press-in wheel studs with M1/2 x 20 threads. The chrome finish provides corrosion resistance during installation and service.

Installation Notes

The kit includes the nut and hardware required to draw new studs into the hub using the lug-nut tightening method, so no hydraulic press is needed. Correct thread engagement is essential; the M1/2 x 20 pitch must match the vehicle hub exactly or the stud will not seat properly. The supplied dimensions of 20 mm by 24.9 mm by 43.15 mm should be verified against the original stud before starting the job.

Practical Limits

This tool set only addresses press-in pin-type studs with a half-inch by 20 thread; it cannot be used for bolt-in studs, larger commercial threads or metric pitches other than the one specified. The chrome coating is intended for standard road use and may not withstand the sustained heat of heavy-duty or racing brake systems. Buyers needing a different thread size or a stud type not listed will require a separate kit.

Highlights

  • Fits Jeep Grand Cherokee 1993-2010 wheel studs
  • M1/2 x 20 thread matches factory specification
  • Chrome finish resists corrosion during installation
  • 20 mm x 24.9 mm x 43.15 mm tool engages pin studs securely
  • Works across Chevrolet, Dodge, Ford, Jaguar, Mercury, Mustang, Pontiac models

Specifications

Brandv-project
Colorchrome
Commercial/ResidentialResidential

Questions about this item

How do I verify the M1/2 x 20 studs are seated correctly after using the installer?

After installation, each stud should sit flush with the hub face and the 20 mm thread length must be fully engaged; turn the wheel by hand to confirm smooth rotation without binding.

What components are included in the kit and what must I supply separately?

The kit contains the chrome installer tool sized for 0.787 in x 0.980 in x 1.698 in pin studs; you must supply the replacement M1/2 x 20 wheel studs and standard hand tools.

Which thread specification should I select for a 1993-2010 Jeep Grand Cherokee?

Choose the M1/2 x 20 half-unit thread size listed for this kit; it matches the factory specification for Grand Cherokee models across those years.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.