We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Chrome wheel stud installer kit with threaded pins and nuts

V-Project Inc

V-Project Inc Wheel Stud Installer Kit Lexus NX 200t 2015-2017 m12x1.5

SKU CH-AKDV-V9QT0

Installs M12×1.5 wheel studs on Lexus NX 200t models from 2015 to 2017

  • Colorchrome
  • Commercial/ResidentialResidential
  • Designed for Lexus NX 200t 2015-2017 fitment
  • m12 x 1.5 thread matches factory specifications
  • Chrome finish resists corrosion during installation
  • 20mm x 24.9mm x 43.15mm dimensions suit pin studs
  • Professional tool simplifies wheel stud replacement

Wheel Stud Installer Kit Lexus NX 200t

The V-Project Inc kit fits Lexus NX 200t models from 2015 through 2017 and uses an m12 x 1.5 thread. It supplies the tools needed to press pin-type studs into the hub without damaging the wheel bearing or flange.

Replaces Hammer And Press Methods

The kit replaces improvised hammer-and-socket techniques that often bend studs or crack hubs. The step up is worth it whenever a broken stud must be swapped on the vehicle without removing the hub assembly.

Simple Press-In Installation

The included driver and nut set align the stud squarely so it draws in straight. The most common error is tightening the nut before the stud seats fully, which leaves the head proud of the flange.

Highlights

  • Designed for Lexus NX 200t 2015-2017 fitment
  • m12 x 1.5 thread matches factory specifications
  • Chrome finish resists corrosion during installation
  • 20mm x 24.9mm x 43.15mm dimensions suit pin studs
  • Professional tool simplifies wheel stud replacement

Specifications

Brandv-project
Colorchrome
Commercial/ResidentialResidential

Questions about this item

What thread size must the wheel hub have for the M12 x 1.5 studs in this kit?

The hub threads must be M12 x 1.5 to accept the supplied pin-type studs.

How do you use the installer tool to press the new studs without damaging the hub?

Place the tool over the stud, tighten the nut gradually to draw the stud into the hub, and stop when the stud shoulder seats fully.

When should the chrome-finished studs be inspected or replaced after installation?

Inspect the studs at each tyre rotation or brake service; replace any that show thread damage, corrosion or looseness.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.