We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Chrome wheel stud installer kit with three stepped sockets for Infiniti FX45

V-Project Inc

V-Project Inc Wheel Stud Installer Kit Infiniti FX45 m12x1.25 Chrome

SKU CH-0FD2-PM78Z

Installs M12 x 1.25 wheel studs on Infiniti FX45 and compatible Nissan and Subaru models

  • Colorchrome
  • Commercial/ResidentialResidential
  • Designed for Infiniti FX45 and many Nissan/Subaru models
  • M12 x 1.25 thread fits factory pin studs precisely
  • Chrome finish resists corrosion during repeated installations
  • Three-piece kit covers 20 mm, 24.9 mm and 43.15 mm lengths
  • Residential-grade tools simplify wheel stud replacement at home

V-Project Wheel Stud Installer Kit

This kit provides the tools needed to install pin-type wheel studs on a wide range of Infiniti and Nissan vehicles. It covers models such as the FX45, G35, Q50 and many others listed in the application guide. Subaru models including the BRZ, WRX and Forester are also supported. The kit is designed for residential garage use.

Chrome finish with m12 x 1.25 thread specification

The components feature a chrome coating and match the m12 x 1.25 thread pitch required by the listed applications. Physical dimensions are 20mm by 24.9mm by 43.15mm, which converts to 0.787 inch by 0.980 inch by 1.698 inch. No power draw, thermal output or noise is generated because this is a hand-operated mechanical tool set.

Pin-type stud compatibility requirement

This installer works only with pin-type wheel studs; it will not suit screw-in or press-in stud designs. Buyers who need a kit for different stud types or for vehicles outside the listed Infiniti, Nissan and Subaru ranges should look elsewhere. The thread size is fixed at m12 x 1.25 and cannot be adapted to other pitches.

Highlights

  • Designed for Infiniti FX45 and many Nissan/Subaru models
  • M12 x 1.25 thread fits factory pin studs precisely
  • Chrome finish resists corrosion during repeated installations
  • Three-piece kit covers 20 mm, 24.9 mm and 43.15 mm lengths
  • Residential-grade tools simplify wheel stud replacement at home

Specifications

Brandv-project
Colorchrome
Commercial/ResidentialResidential

Questions about this item

How do I use the V-Project Inc Wheel Stud Installer Kit to press in new m12x1.25 studs on my Infiniti FX45?

Thread the supplied nut onto the new stud, slide the installer over the hub hole, then tighten the nut to draw the stud fully into the knuckle; the step often missed is confirming the 43.15 mm overall length seats flush before torquing the wheel.

Which parts of the kit wear out first when I do multiple wheel-stud changes on my Infiniti FX45?

The chrome-finished installer sleeve and the drive nut take the highest clamping force; inspect the internal threads and bearing surface after every few uses and replace them if the chrome flakes or the threads gall.

What stops me from pulling the stud all the way in during a long session with this m12x1.25 kit?

The installer’s 20 mm x 24.9 mm x 43.15 mm body limits leverage, so sustained force can stall before the stud seats if the hub bore is corroded or the nut bottoms out on the tool.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.