We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten gold threaded wheel studs with knurled bases on a plain surface

V-Project Inc

V-Project Inc Extended Wheel Studs M12x1.5x50mm 10pcs Gold

SKU CH-SWB6-WKGAZ

Set of ten grade 10.9 extended wheel studs, M12×1.5 thread, 50 mm long with 14.22 mm knurl, fitting many Toyota and Scion models from 1991 to 2016

  • ColorGold
  • Commercial/ResidentialResidential
  • Fits Toyota and Scion models from 1991 to 2016
  • 9 grade steel handles high clamping loads
  • 50 mm thread length suits spacer and wheel upgrades
  • M12 x 1.5 pitch matches factory hub threads
  • 22 mm knurl seats securely in stock hubs

Application Fit

These extended wheel studs are made for Toyota and Scion models built between 1991 and 2016 including Celica, Camry, Corolla, Tacoma and Prius. They replace factory studs on front and rear hubs where longer thread engagement is required.

Critical Dimension

The knurl diameter measures 14.22 millimetres or 0.559 inch and must match the hub bore exactly for a secure press fit. A different knurl size will not seat correctly and can lead to wheel loss.

Capacity And Limits

Ten grade 10.9 studs with M12 by 1.5 threads and 50 millimetres of thread length provide the clamping force needed for standard wheel spacers or thicker rotors. They are not suited for applications that demand a longer thread or a different pitch.

Highlights

  • Fits Toyota and Scion models from 1991 to 2016
  • 9 grade steel handles high clamping loads
  • 50 mm thread length suits spacer and wheel upgrades
  • M12 x 1.5 pitch matches factory hub threads
  • 22 mm knurl seats securely in stock hubs

Specifications

Brandv-project
ColorGold
Commercial/ResidentialResidential

Questions about this item

How much extra thread length does the 50 mm stud add once installed in the hub?

The 50 mm thread length provides additional engagement for wheel spacers or thicker rotors while maintaining full nut contact on Toyota applications.

What does the M12 x 1.5 thread specification mean for fitment?

M12 x 1.5 is the standard thread pitch for the listed Toyota and Scion models from 1991 to 2016, ensuring direct replacement without adapters.

Will the 14.22 mm knurl diameter fit my existing hub holes?

The 14.22 mm knurl matches the factory hub bore on compatible Toyota and Scion vehicles, allowing a press-fit installation without drilling.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.