We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten gold wheel studs with threaded shafts and knurled collars

V-Project Inc

V-Project Inc Extended Wheel Studs M12x1.25 50mm 10pcs Gold

SKU CH-Z7PH-80T8G

Extended wheel studs for Nissan, Infiniti and Subaru models, M12×1.25 thread, 50 mm length, grade 10.9 strength, gold finish, ten pieces

  • ColorGold
  • Commercial/ResidentialResidential
  • Extended thread engagement for secure wheel fitment with 50mm length
  • High-strength Grade 10.9 steel withstands heavy loads
  • Precise M12 x 1.25 thread matches factory hub specifications
  • 3mm knurl diameter ensures tight press-fit retention
  • Ten-piece set covers all corners for complete vehicle service

M12x1.25 50mm Gold Wheel Studs 10pcs

These grade 10.9 extended wheel studs measure 50mm in thread length with a 14.3mm knurl diameter. They fit Nissan and Infiniti models from 1987 through 2016 plus Subaru applications from 1990 to 2016. The gold finish identifies the hardware on the vehicle.

Sustained clamping under thermal cycling

Grade 10.9 steel maintains clamping force through repeated heat cycles from braking and seasonal temperature swings. The 1.25mm thread pitch distributes load across the engaged threads to resist loosening over time. Proper torque installation ensures the knurl seats fully in the hub for long-term retention.

Press-in installation with 14.3mm knurl

Each stud requires a press or draw-through method to seat the 0.565 inch knurl into the hub flange. Builders without a press often damage threads by hammering the studs home. Vehicles outside the listed Nissan Infiniti Subaru range or those needing different thread lengths cannot use this kit.

Highlights

  • Extended thread engagement for secure wheel fitment with 50mm length
  • High-strength Grade 10.9 steel withstands heavy loads
  • Precise M12 x 1.25 thread matches factory hub specifications
  • 3mm knurl diameter ensures tight press-fit retention
  • Ten-piece set covers all corners for complete vehicle service

Specifications

Brandv-project
ColorGold
Commercial/ResidentialResidential

Questions about this item

How much extra thread length do the 50 mm studs add for daily driving heat cycles?

The studs provide 50 mm of thread engagement, maintaining factory clamping force through repeated thermal expansion and contraction.

Which hubs accept the 14.3 mm knurl without reaming?

The 14.3 mm knurl matches the original hub bore on listed Nissan, Infiniti and Subaru models from 1990 to 2016.

Will the M12×1.25 thread pitch fit my 2003 350Z hubs?

Yes, the M12×1.25 pitch is correct for the 2003 350Z and all other listed applications.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.