We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten gold extended wheel studs with knurled heads and threaded shafts

V-Project Inc

V-Project Inc Extended Wheel Studs 50mm M12x1.25 10pcs Gold

SKU CH-K9H6-PWWQQ

Grade 10.9 extended wheel studs, 50 mm long with M12×1.25 thread, supplied in a set of ten for compatible Nissan, Infiniti and Subaru models

  • ColorGold
  • Commercial/ResidentialResidential
  • Grade 10.9 strength handles high clamping loads
  • 50 mm thread length fits thick spacers and rotors
  • M12 × 1.25 pitch matches factory hub threads
  • 3 mm knurl seats securely in OEM hub bores
  • 10-piece set covers front and rear axles

V-Project 50mm Extended Wheel Studs

These 50mm extended wheel studs use a M12x1.25 thread and a 14.3mm knurl diameter. They are manufactured to a 10.9 grade and supplied in a gold finish. The pack contains ten pieces for complete vehicle coverage.

Fits many Nissan, Infiniti

The application list covers vehicles such as the 370Z, G35, G37, 350Z, 300ZX, Maxima, Murano, Frontier, WRX STI, Forester and Legacy across the stated years. Buyers with vehicles outside this range or with different thread specifications should look at other options.

Direct press-in installation replaces factory studs

Installation requires removing the hub, pressing out the original studs and pressing in the new 10.9 grade pins with the 14.3mm knurl. Common issues include insufficient hub removal space and damaged threads if lug nuts are not torqued to the vehicle specification.

Highlights

  • Grade 10.9 strength handles high clamping loads
  • 50 mm thread length fits thick spacers and rotors
  • M12 × 1.25 pitch matches factory hub threads
  • 3 mm knurl seats securely in OEM hub bores
  • 10-piece set covers front and rear axles

Specifications

Brandv-project
ColorGold
Commercial/ResidentialResidential

Questions about this item

What hub knurl diameter must my Nissan 370Z have to accept these M12x1.25 studs?

Your hubs need a 14.3 mm knurl seat; the studs are pressed into that exact diameter.

Will the 50 mm thread length work with my factory brake rotors and OEM wheels on a 2009-2015 370Z?

Yes, the 50 mm thread engages the stock rotor hat and wheel mounting face without spacers.

How do I verify the grade 10.9 studs are seated correctly after installation?

Torque each lug nut to the vehicle specification; fully seated studs show no gap at the knurl and turn smoothly to final torque.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.