We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten gold wheel studs M12x1.25 50mm length grade 10.9

V-Project Inc

V-Project Inc Extended Wheel Stud M12x1.25 50mm Gold 10pcs accessories - wheel

SKU CH-4JP1-FQ63R

M12 x 1.25 extended wheel studs, 50 mm thread length, 14.3 mm knurl, grade 10.9, gold finish, pack of 10

  • ColorGold
  • Commercial/ResidentialResidential
  • Grade 10.9 steel handles high clamping loads
  • 50 mm thread length suits spacer and wheel upgrades
  • 3 mm knurl diameter matches factory hub bores
  • M12 × 1.25 thread fits listed Nissan, Infiniti and Subaru models
  • Ten studs per pack covers both axles on most applications

Extended Wheel Studs M12x1.25 50mm

These extended wheel studs feature an M12x1.25 thread and a 50mm thread length. They are manufactured to grade 10.9 strength with a 14.3mm knurl diameter. The gold finish provides corrosion resistance. The pack contains ten pieces for a complete vehicle set.

Fitment for Nissan Infiniti Subaru Models

The studs suit listed Nissan, Infiniti and Subaru models from 1987 through 2016 including the 350Z, 370Z, G35, G37, Q45 and BR-Z. They cover front and rear axle applications. Vehicles outside the listed model years or with different thread pitches should look at alternative hardware. Builders needing a different knurl size or thread length must source another part.

Press-In Installation With Grade 10.9 Strength

Installation requires pressing the knurled shank into the hub flange using a press or suitable draw tool. The 14.3mm knurl must match the hub bore for correct retention. Lug nuts must engage the full thread depth to reach the rated grade 10.9 clamping force. Re-using old lug nuts or cross-threading during fitment commonly causes stud failure.

Highlights

  • Grade 10.9 steel handles high clamping loads
  • 50 mm thread length suits spacer and wheel upgrades
  • 3 mm knurl diameter matches factory hub bores
  • M12 × 1.25 thread fits listed Nissan, Infiniti and Subaru models
  • Ten studs per pack covers both axles on most applications

Specifications

Brandv-project
ColorGold
Commercial/ResidentialResidential

Questions about this item

What thread size must the vehicle's hubs already have for these M12x1.25 studs to fit?

The hubs must use a M12x1.25 thread pitch to accept these extended wheel studs.

Will the 14.3mm knurl on these studs match the existing hub bore on a 2003 Infiniti Q45?

Yes, the 14.3mm knurl diameter is specified for the 2002-2003 Infiniti Q45 application.

How can I verify the 50mm thread length is fully engaged after installation?

Confirm that at least the full 50mm of thread protrudes through the wheel and allows the lug nut to turn freely for several rotations.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.