V-Project Inc Extended Wheel Stud M12x1.25 50mm 10pcs Gold accessories - wheel

Extended M12x1.25 Wheel Studs

These 50 mm long extended wheel studs replace the factory fasteners on a wide range of Nissan, Infiniti and Subaru models. The 10.9 grade steel and 14.3 mm knurl diameter match the original hub dimensions for a secure press fit. A gold finish adds corrosion resistance while making the studs easy to identify during installation. The pack contains ten pieces, enough for all four corners on most applications.

Sustained Clamping Performance

Grade 10.9 construction maintains clamping force through repeated heat cycles and high lateral loads encountered in track or spirited driving. The 50 mm thread length accommodates thick hub-centric spacers or aftermarket wheels without reducing thread engagement below safe limits. Hardened threads resist galling during repeated torque cycles, preserving preload over the service life of the hardware.

Direct Replacement for Factory Studs

These studs upgrade the original equipment on vehicles such as the 350Z, G35, 370Z, WRX STI and various Legacy, Forester and Maxima models spanning 1990 through 2016. The longer thread reach is only beneficial when spacers or wheels with thicker mounting pads are fitted; stock wheels on unmodified hubs do not require the extra length. Builders retaining factory wheel thickness and no spacers gain no advantage from the extended design.