We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten gold wheel studs with threaded shafts and knurled heads

V-Project Inc

V-Project Inc Extended Wheel Stud 50mm M12x1.25 10pcs Gold

SKU CH-ZQRR-N45GJ

Gold 10.9-grade extended wheel studs, 50 mm M12×1.25 with 14.3 mm knurl, supplied as a 10-piece set for front and rear fitment on listed Nissan, Infiniti and Subaru models

  • ColorGold
  • Commercial/ResidentialResidential
  • Grade 10.9 strength handles high clamping loads
  • 50 mm thread length suits spacer and thick-wheel fits
  • 3 mm knurl matches factory hub bores
  • M12 × 1.25 pitch fits listed Nissan, Infiniti and Subaru models
  • Gold finish resists corrosion on front and rear hubs

V-Project M12x1.25 Extended Wheel Studs

These grade 10.9 steel studs replace factory bolts with a 50 mm thread length and a 14.3 mm knurl diameter. The gold finish resists corrosion while the pin-bolt design ensures precise hub alignment. A pack of ten covers front and rear positions on compatible Nissan, Infiniti and Subaru models.

Suits owners fitting spacers or aftermarket wheels

Builders who need the extra thread engagement for thick spacers or deeper-offset wheels will find the 50 mm length and M12x1.25 pitch match the listed applications. Vehicles outside the 1990-2016 Nissan, Infiniti and Subaru range, or those requiring a different thread pitch, knurl size or bolt grade, should look at alternative hardware.

14.3 mm knurl diameter decides fit

The 14.3 mm knurl must match the hub bore exactly; an undersized knurl allows rotation while an oversized one will not seat. Verify the original stud knurl before ordering, as this single dimension determines whether the studs install correctly on the target vehicle.

Highlights

  • Grade 10.9 strength handles high clamping loads
  • 50 mm thread length suits spacer and thick-wheel fits
  • 3 mm knurl matches factory hub bores
  • M12 × 1.25 pitch fits listed Nissan, Infiniti and Subaru models
  • Gold finish resists corrosion on front and rear hubs

Specifications

Brandv-project
ColorGold
Commercial/ResidentialResidential

Questions about this item

How do I confirm the 50 mm M12x1.25 studs are seated correctly after installation?

After fitting the 14.3 mm knurl into the hub, the stud should sit flush with no visible gap and the 10.9-grade threads must accept a lug nut through the full 50 mm length without binding.

What comes in the package and is anything else required?

The box contains 10 gold-coloured extended wheel studs; lug nuts matching the M12x1.25 thread are not included and must be purchased separately if the originals are not reused.

Which of the listed vehicle applications should I select for my Infiniti FX35?

Choose the studs marked for Infiniti FX35 2003-2008; they are specified for both front and rear positions with the 50 mm thread length and 14.3 mm knurl diameter.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.