We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten gold wheel studs with extended 63mm shanks and 12.2mm knurl heads

V-Project Inc

V-Project Inc 63mm Extended Wheel Studs M12x1.5 10pcs Gold

SKU CH-WW7Z-8BBRE

Set of ten gold-coloured grade 10.9 extended wheel studs with M12×1.5 thread, 63 mm shank and 12.20 mm knurl for Honda and Acura models 1995–2016

  • ColorGold
  • Fits Honda and Acura models from 1995 to 2016
  • 2 mm knurl diameter matches factory hub bores
  • 63 mm thread length suits spacer installations
  • Grade 10.9 steel handles high clamping loads
  • Pack of 10 replaces all studs on one axle

Honda & Acura 1995-2016 Fitment

These 63 mm extended wheel studs suit Honda Accord, Civic, CR-V and related Acura models built between 1995 and 2016. They install on front or rear hubs and replace the factory pins with a longer thread for spacer use. The pack contains ten gold-coloured pieces.

Builders using slip-on spacers

The 63 mm shank and M12 x 1.5 thread match the listed Honda and Acura applications exactly. Vehicles outside the 1995-2016 range or those requiring a different thread pitch or knurl diameter should use the correct part for that chassis.

12.20 mm knurl diameter

Each stud carries a 12.20 mm knurl that must match the hub bore for a secure press fit. Verify the hub knurl size before ordering; an incorrect diameter will prevent proper installation.

Highlights

  • Fits Honda and Acura models from 1995 to 2016
  • 2 mm knurl diameter matches factory hub bores
  • 63 mm thread length suits spacer installations
  • Grade 10.9 steel handles high clamping loads
  • Pack of 10 replaces all studs on one axle

Specifications

Brandv-project
ColorGold

Questions about this item

What comes in the box and what must I source separately?

The box contains ten gold-coloured extended wheel studs, each 63 mm long with an M12×1.5 thread and a 12.20 mm knurl. Lug nuts are not included and must be purchased separately.

Which version should I choose for my vehicle?

These studs share a single specification — M12×1.5 thread, 63 mm thread length, 12.20 mm knurl and grade 10.9 — and fit the listed Honda and Acura models from 1995 to 2016 plus the Isuzu applications shown.

What does the 10.9 grade mean once the studs are installed?

Grade 10.9 indicates a high-strength alloy steel fastener rated for the clamping loads required on front and rear hubs of the compatible vehicles.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.