We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten gold wheel studs with threaded shafts and knurled heads

V-Project Inc

V-Project Inc 63mm Extended Wheel Stud M12x1.5 10pcs Gold accessories - wheel

SKU CH-47QA-7ZWPZ

Set of ten grade 10.9 gold wheel studs with 63 mm shank, M12×1.5 thread and 12.20 mm knurl for Honda and Acura models from 1995 to 2016

  • ColorGold
  • Extended 63 mm thread length clears thick spacers and aftermarket wheels
  • Grade 10.9 high-strength steel handles heavy track and street loads
  • 20 mm knurl diameter matches factory hub bores for a secure press fit
  • M12 × 1.5 thread pitch fits Honda and Acura models from 1995 to 2016
  • Ten-piece set replaces all front and rear studs in one purchase

Extended M12×1.5 wheel studs for 1995-2016 Honda

These gold-coloured 10.9-grade studs replace factory bolts on a wide range of Honda, Acura and Isuzu vehicles built between 1995 and 2016. The 10-piece set covers both front and rear hubs for owners fitting spacers or aftermarket wheels that require longer thread engagement.

63 mm thread length with 12.20 mm knurl

Each stud provides 63 mm of M12×1.5 thread, giving enough protrusion for typical 12 mm to 15 mm spacers while retaining full nut engagement. The 12.20 mm knurl diameter matches the original hub bore, so the stud seats securely without modification. Builds needing more than 15 mm of spacer thickness will exceed the available thread length.

Press-in installation frees up lug-nut choice

The pin-bolt design is pressed into the existing hub, eliminating the need for wheel bolts and allowing standard M12×1.5 lug nuts. No special tools beyond a press or draw-through method are required, and the 10.9 grade maintains factory strength. Vehicles outside the listed 1995-2016 Honda, Acura and Isuzu applications cannot use these studs.

Highlights

  • Extended 63 mm thread length clears thick spacers and aftermarket wheels
  • Grade 10.9 high-strength steel handles heavy track and street loads
  • 20 mm knurl diameter matches factory hub bores for a secure press fit
  • M12 × 1.5 thread pitch fits Honda and Acura models from 1995 to 2016
  • Ten-piece set replaces all front and rear studs in one purchase

Specifications

Brandv-project
ColorGold

Questions about this item

Will the M12x1.5 thread and 12.20 mm knurl match the hubs on my 1995-2016 Honda Civic?

Yes, the studs are M12x1.5 with a 12.20 mm knurl, specified for Honda Civic 1995-2016 front and rear hubs.

How can I verify the 10.9 grade studs are seated correctly after installation?

After torquing to the vehicle specification, confirm each stud draws fully into the hub so the knurl seats flush and the 63 mm shank extends evenly.

Does the 10-piece gold set include lug nuts or must I buy them separately?

The box contains only the ten extended wheel studs; lug nuts are not included and must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.