Peerless Industrial Group
Peerless Industrial Group Tire Chains Single Bus & RV V-Bar PK2 QG2821
$67.99
0.00081396BTC
In stock
V-Project Inc
V-Project Inc 50mm Extended Wheel Studs M12x1.25 10pcs Gold Nissan Rogue V4 2.5 2008-2015
Gold 50 mm extended M12×1.25 wheel studs, grade 10.9, 14.3 mm knurl, 10-piece set for Nissan Rogue 2.5 2008-2015 front and rear
- ColorGold
- Commercial/ResidentialResidential
- Grade 10.9 strength handles high wheel loads
- 50 mm thread length fits spacer installations
- M12×1.25 pitch matches factory hub threads
- 3 mm knurl seats securely in OEM hubs
- Gold finish resists corrosion on daily drivers
50 mm Extended Wheel Studs M12x1.25 10pcs Gold
These 50 mm long extended wheel studs suit the Nissan Rogue V4 2.5 from 2008 to 2015 and a wide range of other Nissan and Infiniti models listed in the application data. They are grade 10.9 pin bolts with a 14.3 mm knurl diameter and come in a pack of ten finished in gold. The thread specification is M12 by 1.25 for front and rear fitment.
Check thread size knurl
Verify that your vehicle requires M12 by 1.25 threads and a 14.3 mm knurl head before purchase. Confirm the original stud length so the 50 mm thread length provides the needed extension for spacers or thicker wheels. Ensure the hub can accommodate the longer stud without bottoming out the lug nut. These studs fit front and rear positions on the listed applications.
Replaces factory studs when adding spacers
The jump is worth it when factory studs are too short for wheel spacers, thicker brake hats or aftermarket wheels that demand more thread engagement. Grade 10.9 strength matches or exceeds typical OEM hardware for the listed Nissan, Infiniti and Subaru models. Do not use if your hubs require a different thread pitch, knurl diameter or shorter stud length.
Highlights
- Grade 10.9 strength handles high wheel loads
- 50 mm thread length fits spacer installations
- M12×1.25 pitch matches factory hub threads
- 3 mm knurl seats securely in OEM hubs
- Gold finish resists corrosion on daily drivers
Specifications
| Brand | v-project |
|---|---|
| Color | Gold |
| Commercial/Residential | Residential |
Questions about this item
What comes in the box and do I need to buy lug nuts separately?
The box contains 10 gold wheel studs with M12x1.25 threads and 50 mm thread length. Lug nuts are not included and must be purchased separately.
Which length and thread size should I choose for a 2008-2015 Nissan Rogue V4 2.5?
These studs are built to M12x1.25 with 50 mm thread length and a 14.3 mm knurl, matching the factory specification for the Rogue V4 2.5 from 2008 to 2015.
What does the 10.9 grade mean once the studs are installed on the car?
Grade 10.9 indicates high tensile strength, so the studs handle the clamping loads of daily driving and track use on the Rogue and other listed Nissan and Infiniti models.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
