We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gold M12x1.25 extended wheel studs, 50mm thread, 10 pieces

V-Project Inc

V-Project Inc 50mm Extended Wheel Studs M12x1.25 10pcs Gold accessories - wheel

SKU CH-K400-DBYG3

50 mm grade 10.9 extended wheel studs with M12×1.25 thread and 14.3 mm knurl, supplied as a 10-piece gold set for front or rear fitment on listed Nissan, Infiniti and Subaru models

  • ColorGold
  • Commercial/ResidentialResidential
  • Extended thread length fits thicker spacers and rotors
  • 9 grade steel handles high clamping loads
  • 3 mm knurl seats securely in OEM hubs
  • M12×1.25 thread matches factory Nissan and Infiniti specs
  • Ten studs cover front and rear on most applications

Vehicle Compatibility

These extended wheel studs are designed for Nissan and Infiniti models produced between 1987 and 2016, plus select Subaru vehicles up to 2016. They replace factory studs on front and rear hubs where longer thread engagement is required for wheel spacers or aftermarket wheels.

Critical Specification

Each stud features an M12 x 1.25 thread pitch with a 50 mm thread length and a 14.3 mm knurl diameter. The grade 10.9 rating confirms high tensile strength for demanding automotive use.

Installation Notes

The knurled section must be pressed fully into the hub flange until seated; a stud installer tool prevents thread damage. Verify that the 14.3 mm knurl matches the hub bore before starting. Insufficient press force or cross-threading the lug nuts are the most common errors.

Highlights

  • Extended thread length fits thicker spacers and rotors
  • 9 grade steel handles high clamping loads
  • 3 mm knurl seats securely in OEM hubs
  • M12×1.25 thread matches factory Nissan and Infiniti specs
  • Ten studs cover front and rear on most applications

Specifications

Brandv-project
ColorGold
Commercial/ResidentialResidential

Questions about this item

How does the 50 mm thread length affect fitment on a Nissan Tsuru V4 1.6?

The 50 mm thread provides extra engagement for wheel spacers or thicker rotors on the Tsuru V4 1.6 from 1991 to 2016.

What does the M12 x 1.25 thread pitch limit when installing these studs?

The M12 x 1.25 pitch matches the factory hub threads on listed Nissan and Infiniti models, so only lug nuts with the same pitch can be used.

Will the 14.3 mm knurl seat in a Subaru WRX STI hub without modification?

The 14.3 mm knurl diameter is designed for the hub bores on 1995 to 2015 WRX STI models, allowing a direct press-in fit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.