We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten gold wheel studs with coarse threads and knurled bases

V-Project Inc

V-Project Inc 50mm Extended Wheel Stud M12x1.5 Gold 10pcs

SKU CH-0HY2-01TV5

Gold M12×1.5 wheel studs, 50 mm thread length, 14.22 mm knurl, grade 10.9, 10-piece set fits many Toyota and Scion models from 1991 to 2016

  • ColorGold
  • Commercial/ResidentialResidential
  • Extended 50 mm thread length for spacer clearance
  • Grade 10.9 strength handles high wheel loads
  • Fits Scion tC 2005-2011 front and rear
  • 22 mm knurl ensures secure hub retention
  • Gold finish resists corrosion on 10-piece set

Vehicle fitment

These extended wheel studs suit Toyota and Scion models built between 1991 and 2016, including Camry, Corolla, RAV4, Tacoma, Prius and tC. They provide the longer thread engagement needed when fitting wheel spacers or aftermarket wheels on those platforms.

Limits of use

The studs are M12 x 1.5 with a 14.22 mm knurl, so they will not fit hubs that require a different thread pitch, knurl diameter or seat type. Vehicles outside the listed Toyota and Scion ranges, or those using lug bolts instead of studs, should look at alternative hardware.

Critical specification

Each stud has a 50 mm thread length and a grade 10.9 rating, delivered in a set of 10 pieces. This length and strength combination determines whether the stud can safely accommodate your chosen spacer thickness and wheel offset.

Highlights

  • Extended 50 mm thread length for spacer clearance
  • Grade 10.9 strength handles high wheel loads
  • Fits Scion tC 2005-2011 front and rear
  • 22 mm knurl ensures secure hub retention
  • Gold finish resists corrosion on 10-piece set

Specifications

Brandv-project
ColorGold
Commercial/ResidentialResidential

Questions about this item

Do the 10.9 grade M12×1.5 studs generate extra heat or stress during long highway driving?

No, these are passive steel fasteners rated 10.9; they do not produce heat or draw power once torqued to spec.

Will the 14.22 mm knurl seat correctly in my hub without re-drilling?

The 14.22 mm knurl matches the factory hole on the listed Toyota and Scion models from 1991 to 2016, so no re-drilling is needed.

Can I mix these 50 mm gold studs with the shorter original studs still on the rear axle?

All ten studs are 50 mm long; mixing lengths on the same axle is not recommended because wheel seating and torque would become uneven.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.