We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten gold wheel studs with knurled heads and threaded shafts

V-Project Inc

V-Project Inc 50mm Extended Wheel Stud M12x1.25 10pcs Gold

SKU CH-ECHF-DE4M9

M12×1.25 gold studs extend wheel threads by 50 mm with a 14.3 mm knurl for Nissan, Infiniti and Subaru fitments

  • ColorGold
  • Commercial/ResidentialResidential
  • 9 grade steel handles high clamping loads
  • 50 mm thread length suits spacer and rotor upgrades
  • 3 mm knurl matches factory hub bores
  • M12 × 1.25 thread fits listed Nissan, Infiniti, Subaru models
  • Pack of 10 studs covers all four corners

Extended wheel studs M12 x 1.25

These 50 mm long gold studs replace the original bolts on a wide range of Nissan, Infiniti and Subaru models. The pack contains ten grade 10.9 pieces with a 14.3 mm knurl diameter and a 1.25 mm thread pitch for front or rear fitment.

Check fitment before ordering

Confirm that your vehicle uses a M12 x 1.25 thread and that 50 mm thread length is required for your wheel spacer or aftermarket wheel setup. Verify the 14.3 mm knurl matches the hub bore so the stud seats correctly without modification.

Upgrade from factory bolts

The extended length allows safe installation of wheel spacers or deeper-offset wheels that standard bolts cannot accommodate. The grade 10.9 rating provides the clamping strength needed for track or daily use on the listed applications.

Highlights

  • 9 grade steel handles high clamping loads
  • 50 mm thread length suits spacer and rotor upgrades
  • 3 mm knurl matches factory hub bores
  • M12 × 1.25 thread fits listed Nissan, Infiniti, Subaru models
  • Pack of 10 studs covers all four corners

Specifications

Brandv-project
ColorGold
Commercial/ResidentialResidential

Questions about this item

Are the 10 studs the only parts included, or do I need to buy lug nuts separately?

The pack contains 10 gold extended wheel studs only; lug nuts are not included and must be purchased separately.

The listing shows M12x1.25 thread and 14.3 mm knurl — which vehicles match those specs?

The studs fit the listed Nissan, Infiniti and Subaru models from 1987 to 2016 that use M12x1.25 thread with a 14.3 mm knurl diameter.

What does the grade 10.9 rating mean for daily driving on a 350Z or WRX STI?

Grade 10.9 indicates high tensile strength, so the 50 mm studs handle the clamping loads of a 350Z, WRX STI or other listed vehicles under normal street use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.