We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square black 80mm AC case fan with dual ball bearings

UXCell

UXCell A18062300Ux0023 80mm case fan AC 220-240V 2500 RPM

SKU CH-NPJ2-J7EWP MPN A18062300Ux0023

An 80 mm AC case fan running at 2500 RPM with dual ball bearings for 30 dB-A noise

  • TypeCase Fan
  • Direct AC 220-240V operation removes the need for a separate power supply
  • Dual ball bearings extend service life and maintain consistent 2500 RPM speed
  • Compact 80 x 80 x 25 mm frame fits standard mounting holes spaced 73 mm apart
  • Low 30 dB-A noise level keeps the system quiet while delivering 0.5 CFM airflow
  • Efficient 13 W draw at 0.07 A provides cost-effective cooling for industrial enclosures

UXCell 80mm AC case fan

This UXCell 80mm case fan runs directly from AC 220-240V mains supply without an external adapter. It suits equipment racks, industrial enclosures or custom builds that need a self-contained airflow source at 2500 RPM.

Installation notes

The frame measures 80 x 80 x 25 mm with mounting holes spaced 73 mm apart. Dual ball bearings reduce bearing wear but can transmit more vibration than sleeve types; secure all four screws evenly and use rubber grommets if the chassis amplifies noise.

Pre-purchase checks

Confirm your enclosure has an 80 mm cut-out and 73 mm hole pattern before ordering. Verify the local mains voltage sits within 220-240V AC and that a 13W, 0.07A draw is acceptable for the circuit. This fan has no PWM or speed-control lead so it runs at full speed whenever powered.

Highlights

  • Direct AC 220-240V operation removes the need for a separate power supply
  • Dual ball bearings extend service life and maintain consistent 2500 RPM speed
  • Compact 80 x 80 x 25 mm frame fits standard mounting holes spaced 73 mm apart
  • Low 30 dB-A noise level keeps the system quiet while delivering 0.5 CFM airflow
  • Efficient 13 W draw at 0.07 A provides cost-effective cooling for industrial enclosures

Specifications

TypeCase Fan

Questions about this item

How can I confirm the fan is running correctly after wiring it to AC mains?

Measure the current draw; it should read around 0.07 A at 220–240 V, and the blades should spin steadily near 2500 RPM with a noise level close to 30 dB-A.

What comes in the box and what must I source separately?

The package contains the 80 × 80 × 25 mm fan with dual ball bearings and 73 mm mounting-hole spacing; you will need to supply your own AC 220–240 V power cable and mounting screws.

Which voltage version should I select for a standard UK mains supply?

Choose the AC 220–240 V model rated at 0.07 A and 13 W; it matches UK mains voltage directly without any additional converter.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.