We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six black rectangular IEC C13 and C14 panel mount connectors with screw terminals

UXCell

UXCell 6-Pair IEC320 C13 C14 Panel Mount Adapter 2 in 1 Accessory

SKU CH-WHKR-BGFST

Six-pack of panel-mount IEC320 C13/C14 adapters rated 250 V 10 A with 8 mm wire holes for DIY power cords

  • DIY power cords with C13 and C14 inline detachable adapter
  • Corrosion-resistant pure copper terminals extend connector lifespan
  • Fits PDU cabinets, industrial gear, printers and household appliances
  • Rated 250 V 10 A for standard IEC320 3-pin connections
  • Panel-mount design with 8 mm wire hole secures cables firmly

Panel Mount IEC320 C13 C14 Adapter Kit

This pack contains six pairs of panel mount connectors rated AC 250V 10A with three terminals. Each C14 socket measures 77 x 29 x 20mm and each C13 plug measures 73 x 27 x 18mm. Pure copper contacts provide corrosion resistance for long service life in PDU cabinets, industrial equipment, peripherals, printers and household appliances. No cord is included.

Suited for DIY and Industrial Panel Wiring

Builders assembling custom power cords for rack mounted gear or equipment panels will find the detachable inline format convenient. The 8mm wire hole accepts standard three pin cables and the clamp plate secures the connection. Buyers needing a ready made cable with moulded ends or a higher current rating should look at something else.

Verify Panel Cut Out and Voltage Compatibility

Confirm the panel cut out matches the socket and plug dimensions before ordering. Ensure the local mains voltage is compatible with the 250V rating and that the 10A limit meets the load requirements. The installation sequence requires tightening the nut first then securing the screw on the clamp plate.

Highlights

  • DIY power cords with C13 and C14 inline detachable adapter
  • Corrosion-resistant pure copper terminals extend connector lifespan
  • Fits PDU cabinets, industrial gear, printers and household appliances
  • Rated 250 V 10 A for standard IEC320 3-pin connections
  • Panel-mount design with 8 mm wire hole secures cables firmly

Specifications

No published specifications for this item yet.

Questions about this item

What cable diameter fits the 8 mm wire hole on the C13 and C14 connectors?

The panel-mount adapters accept cables up to 8 mm (0.31 in) in diameter; strip the wires, secure the nut first, then tighten the clamp-plate screw to lock the cord in place.

Will these IEC320 C13/C14 adapters mate with the C13 inlets on my existing PDU power strips?

Yes — each C14 socket and C13 plug follows the IEC320 standard, so they connect directly to any C13 inlet or C14 outlet already on your PDU or equipment.

How can I confirm the pure-copper terminals are making good contact after wiring the adapters?

After tightening the clamp screws, verify the cable cannot pull free, then power the circuit and check that connected devices start normally without intermittent operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.