UXCell
UXCell 30m 100ft CCTV RCA Audio Video Power Cable
Combines video, audio and DC power in a single 30 m black cable with pre-made RCA and power connectors for CCTV cameras
- TypeHI - Wire & Cable Connectors & Insulation
- Transmits power, video and audio through one cable
- 30 metre length suits extended CCTV runs
- Bare copper conductor carries signals reliably
- Pre-made RCA and DC connectors speed installation
- Weighs 501 g for easy handling
Single-cable CCTV run
The UXCell cable combines DC power and composite video plus audio in one 30-metre black run so installers can wire a camera to a monitor and supply without pulling separate leads. Bare copper conductors carry both signals and low-voltage power. Pre-fitted RCA and DC plugs let the cable go straight from box to camera.
Replacing separate Siamese or twin-lead installs
Running one jacket instead of two cuts ladder time and reduces the number of holes drilled through walls or soffits. The jump is worth it when the camera sits within the 100-foot reach and the supply is a standard DC source. Builders who need longer distances or AC mains wiring will need a different solution.
Composite video and DC power limits
The single jacket caps the video run at the supplied length because signal loss and voltage drop increase together beyond 30 metres. Composite bandwidth restricts resolution to standard-definition formats. The cable is rated for DC power only and must not be used for AC mains or data networks.
Highlights
- Transmits power, video and audio through one cable
- 30 metre length suits extended CCTV runs
- Bare copper conductor carries signals reliably
- Pre-made RCA and DC connectors speed installation
- Weighs 501 g for easy handling
Specifications
| Type | HI - Wire & Cable Connectors & Insulation |
|---|---|
| Brand | Unique Bargains |
Questions about this item
How much space does the 30 m cable need for routing?
The cable weighs 501 g and measures 100 ft end to end, so allow enough slack for that length and weight when planning conduit or trunking routes.
Which ends plug in first when connecting camera, monitor and power?
Attach the pre-made RCA plugs to the camera video and audio inputs, then connect the DC power connector to the camera power socket before linking the other ends to the monitor and supply.
What part of the cable is most likely to need replacement after long outdoor runs?
The bare copper conductor and pre-made connectors are exposed to weather; inspect the RCA and DC plugs for corrosion or conductor fatigue and replace the affected section if signal or power drops.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Unique-Bargains 2-Position Speaker Terminal Block 2 Pcs
- HI - Wire & Cable C…



