Ushio
Ushio ENZ JCR30V-50W 30V 50W Halogen Standard Bulb
30 V halogen reflector with GX5.3 base, 3400 K output and 25-hour rated life
- TypeHalogen Bulbs
- Wattage50W
- Color Temperature3400K
- Life Time Hours25
- 50 W halogen output for bright projection
- 3400 K colour temperature gives crisp white light
- GX 5.3 base fits compatible MR16 fixtures
- 30 V operation matches specified equipment requirements
- 25-hour rated life for short-duration use
Ushio ENZ Halogen Projector Bulb
The Ushio ENZ JCR30V-50W is a 30V 50W halogen reflector lamp built for projector applications. It uses a GX5.3 base and MR16 form factor to fit compatible housings. The 3400K colour temperature delivers a warm white output suited to display and projection use. Condition is new.
25-hour rated life and headroom
Rated lifetime is 25 hours at full 50W output, so the bulb is intended for intermittent or short-duration projection sessions. Continuous operation will reach the rated limit quickly, making it unsuitable for all-day or unattended running. The 30V supply requirement means it must be paired with the correct projector ballast or transformer. No longer-life variant is offered in this model.
GX5.3 base and 30V electrical interface
The GX5.3 bi-pin base locks into MR16 sockets with a 5.3 mm pin spacing, so it only fits fixtures designed for that exact base. Operation at 30 volts requires the projector to provide the matching low-voltage supply; mains-voltage sockets will destroy the lamp. The MR16 reflector directs light forward, but the physical envelope must clear the projector’s lamp compartment. No dimming or alternative voltage ratings are specified.
Highlights
- 50 W halogen output for bright projection
- 3400 K colour temperature gives crisp white light
- GX 5.3 base fits compatible MR16 fixtures
- 30 V operation matches specified equipment requirements
- 25-hour rated life for short-duration use
Specifications
| Brand | Ushio |
|---|---|
| Type | Halogen Bulbs |
| Wattage | 50W |
| Color Temperature | 3400K |
| Life Time Hours | 25 |
Questions about this item
Will the GX5.3 base fit the MR16 socket in my existing projector?
The bulb uses a GX5.3 bi-pin base designed for standard MR16 sockets, so it should connect directly if your projector accepts that base type.
How can I confirm the 3400K colour temperature is correct once installed?
The light should appear as a warm white similar to other 3400K halogen sources; a handheld colour meter can verify the exact rating if needed.
Does the package include the reflector housing or only the bare lamp capsule?
The description specifies an MR16 halogen reflector bulb, meaning the reflector is built into the lamp; no separate housing is required.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



