Ushio
Ushio ELC-5 JCR24V-250W 24V 250W Halogen Bulb
24 V 250 W halogen projector bulb with GX 5.3 base, 550 lm output and 500-hour rated life
- TypeHalogen Bulbs
- Wattage250
- Color Temperature3400K
- Life Time Hours500
- Bright 550-lumen output for clear projection
- 24 V 250 W halogen design matches fixture requirements
- GX 5.3 two-pin base fits compatible sockets
- 3 250 K colour temperature delivers warm white light
- 500-hour rated life reduces replacement frequency
Precise Projector Illumination
This Ushio halogen bulb delivers 250 watts of light at 24 volts for compatible projector systems. It uses a GX 5.3 2-Pin base and produces 550 lumens at a 3250K colour temperature. The clear lamp finish ensures clean output for presentation or display use. Rated life is 500 hours under normal operation.
Replacing Worn ELC-5 Lamps
Install this unit when an existing ELC-5 type bulb reaches end of life or dims below usable output. The jump is worth it when colour consistency at 3400K matters for calibrated projection. It matches the original 1.765 inch length and 1.989 inch diameter for direct fit. Buyers needing higher lumen output or longer rated life should verify specifications before ordering.
Steady Output Over 500 Hours
The filament maintains stable brightness across the rated 500 hour lifespan without rapid early decay. Halogen chemistry reduces blackening on the 1.989 inch diameter envelope during sustained operation. Heat dissipates through the compact 1.765 inch body designed for enclosed projector housings. Performance stays consistent until the rated hour limit is reached.
Highlights
- Bright 550-lumen output for clear projection
- 24 V 250 W halogen design matches fixture requirements
- GX 5.3 two-pin base fits compatible sockets
- 3 250 K colour temperature delivers warm white light
- 500-hour rated life reduces replacement frequency
Specifications
| Brand | Ushio |
|---|---|
| Type | Halogen Bulbs |
| Wattage | 250 |
| Color Temperature | 3400K |
| Life Time Hours | 500 |
Questions about this item
What fixture dimensions will the 1.989 inch diameter and 1.765 inch length MR16 lamp fit?
The MR16 envelope measures 1.989 inches across and 1.765 inches end to end, so it fits standard MR16 sockets that accept those dimensions.
How do I seat the GX5.3 2-pin base correctly?
Align the two pins with the socket holes and push straight in until the lamp bottoms out; forcing it at an angle bends the pins.
When should I plan to replace the 500-hour rated lamp?
Expect roughly 500 hours of use before output drops; keep a spare Ushio 1003264 on hand for uninterrupted projection.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



