Ushio
Ushio DYR/220V JCD220V-650WC1 650W 220V 3200K 50h GY9.5 standard bulb
A 650 W 220 V halogen lamp with a GY9.5 base, rated 50 hours at 3200 K
- TypeHalogen Bulbs
- Wattage650
- Color Temperature3200K
- Life Time Hours50
- 650-watt output delivers bright projection for stage and studio use
- 3200 K colour temperature provides warm white light suited to halogen fixtures
- 50-hour rated life supports short-run productions and events
- GY9.5 medium prefocus base fits compatible projector and follow-spot sockets
- 220-volt operation matches standard mains supply in many regions
Ushio DYR Halogen Projector Bulb
This Ushio DYR halogen bulb operates at 650 watts and 220 volts with a 3200K colour temperature. It fits a GY9.5 medium prefocus base and uses a 2CC-8 filament design. The rated service life is 50 hours. It is sold as a new replacement lamp for compatible projectors.
Suited for 220V projector fixtures needing 650W
This lamp suits owners of projectors that specify a 650 watt, 220 volt halogen source with a GY9.5 base and 3200K output. Buyers needing a longer service life, a different wattage, a different voltage or another base type should look at alternative lamps.
Verify fixture voltage.
Confirm that your projector requires exactly 220 volts and 650 watts and accepts a GY9.5 medium prefocus base. Check that the 3200K colour temperature matches the original specification and that the 50 hour rated life meets your usage expectations.
Highlights
- 650-watt output delivers bright projection for stage and studio use
- 3200 K colour temperature provides warm white light suited to halogen fixtures
- 50-hour rated life supports short-run productions and events
- GY9.5 medium prefocus base fits compatible projector and follow-spot sockets
- 220-volt operation matches standard mains supply in many regions
Specifications
| Brand | Ushio |
|---|---|
| Type | Halogen Bulbs |
| Wattage | 650 |
| Color Temperature | 3200K |
| Life Time Hours | 50 |
Questions about this item
Does the fixture need a GY9.5 medium prefocus socket for this bulb to fit?
Yes, the bulb uses a GY9.5 base that fits a medium prefocus socket rated for 220 V and 650 W.
Can I keep my existing dimmer if it is rated for halogen loads up to 650 W?
The bulb is a 650 W halogen type; a dimmer rated for at least that load and for 220 V operation will work.
How do I confirm the 3200 K colour temperature after installation?
When powered at 220 V the filament runs at 3200 K, giving a warm white output consistent with the rated colour temperature.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



