Ushio
Ushio BRL JC12V-50W/G6.35 CBAR6 Halogen Standard Bulb
A 12-volt, 50-watt halogen projector lamp with a G6.35 base, 3400 K output and 1,600 lumens rated for 50 hours
- TypeHalogen Bulbs
- Wattage50
- Color Temperature3400K
- Life Time Hours50
- Bright 3400 K light suits projection tasks
- 1600 lumens deliver strong output for its size
- Compact 44 mm length fits tight fixtures
- G6.35 bi-pin base enables quick lamp changes
- 50-hour rated life matches spec for high-intensity use
Ushio 12 V 50 W Halogen Projector Lamp
The Ushio BRL JC12V-50W/G6.35 is a 12 volt halogen bulb rated at 50 watts with a colour temperature of 3400 K. It uses a G6.35 two-pin base and a T-3.5 envelope measuring 44.0 mm long and 11.5 mm wide. The lamp is designed as a direct replacement for projectors and similar fixtures that require this specific ANSI-coded lamp.
Rated Output and Service Life
The lamp produces 1600 lumens from a CBar6 filament with a light centre length of 30.0 mm. Average life is rated at 50 hours under continuous operation, so it suits occasional projection sessions rather than daily extended use. Buyers needing longer intervals between replacements should note the limited 50-hour rating.
Compact Two-Pin Construction
The glass envelope is 1.732 inches long and 0.453 inches in diameter, fitting tight projector housings that accept a G6.35 base. The two-pin push-fit base allows tool-free installation when the fixture matches the 6.35 mm pin spacing. Fixtures with a different base type or voltage requirement will not accept this lamp.
Highlights
- Bright 3400 K light suits projection tasks
- 1600 lumens deliver strong output for its size
- Compact 44 mm length fits tight fixtures
- G6.35 bi-pin base enables quick lamp changes
- 50-hour rated life matches spec for high-intensity use
Specifications
| Brand | Ushio |
|---|---|
| Type | Halogen Bulbs |
| Wattage | 50 |
| Color Temperature | 3400K |
| Life Time Hours | 50 |
Questions about this item
Will this 12 volt G6.35 base halogen bulb fit my older projector that uses a JC12V-50W lamp?
Yes, it matches the 12 volt requirement, G6.35 two-pin base, 44.0 mm overall length and 30.0 mm light center length of the original JC12V-50W lamp.
How can I confirm the bulb is operating correctly once installed?
The lamp should reach its 3400K colour temperature and deliver the rated 1600 lumens immediately; verify the projector's brightness and colour balance against its specifications.
What comes in the package and do I need any extra parts?
The box contains the single Ushio BRL halogen bulb with G6.35 base; no additional connectors, transformers or mounting hardware are included.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



