Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Ushio
A 750W 240V halogen lamp with G9.5 base and heat sink delivers 19750 lumens at 3200K for 300 hours
The Ushio 1003184 is a 750W 240V halogen lamp built for stage and studio fixtures that accept a G9.5 2-pin base with heat sink. It delivers 19750 lumens at 3200K with a CRI of 100 for accurate colour rendering. The T6 envelope measures .72 in diameter and 4.09 in overall length. It is designed for professional lighting crews who need maximum output from ETC Source Four fixtures.
The lamp draws 750W at 240V and carries a rated life of 300 hours under normal operation. Its ceramic heat sink base maintains consistent electrical resistance throughout the lamp's lifespan. The compact 6-C8 filament geometry improves optical efficiency by up to 20 percent compared to earlier designs. Heat output is significant and requires fixtures rated for this wattage and voltage.
The G9.5 2-pin base with integrated heat sink ensures secure electrical contact and thermal management in compatible sockets. No additional accessories or software are included with the lamp itself. The clear finish and precise filament alignment allow the fixture's optics to achieve the full 20 percent lumen gain. Buyers needing a different voltage, wattage, or base type must select an alternative model.
| Brand | Ushio |
|---|---|
| Type | Halogen Bulbs |
| Wattage | 750 |
Align the two pins with the socket slots, push firmly until the ceramic base seats flush, then secure the fixture's retention latch; the heat sink must contact the fixture's thermal path or the lamp will overheat and fail early.
After approximately 300 hours of operation the tungsten filament degrades and output drops noticeably; replace the lamp once brightness falls below the level needed for your production.
The ceramic heat sink base reaches its maximum safe temperature first; if the fixture's cooling airflow is restricted the lamp will shut down or suffer premature filament failure.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?