Ushio
Ushio 1000605 FSH JCV120V-125WB Halogen Standard Bulb 120V 125W 2500 Lumens 3000K 200h
Halogen bulb delivering 2500 lumens at 3000K for 200 hours on 120V 125W power
- TypeHalogen Bulbs
- Lumen Range2500
- Wattage125
- Color Temperature3000K
- Life Time Hours200
- Bright 2500 lumen output for clear projection
- Warm 3000K colour temperature suits studio lighting
- 125W halogen lamp runs on standard 120V supply
- Rated 200-hour life for reliable fixture use
- Ushio 1000605 fits Lowel ViP Pro-light fixtures
Halogen Projector Lamp 125W
The Ushio 1000605 FSH is a 120V halogen bulb rated at 125W and 2500 lumens with a 3000K colour temperature. It is designed for projector fixtures such as the Lowel ViP Pro-light and similar studio lighting equipment.
Replaces FSH-Coded Halogen Lamps
This bulb serves as a direct replacement for any fixture specifying an FSH or JCV120V-125W lamp. The upgrade is worthwhile when the existing lamp has reached its 200-hour rated life or when colour consistency at 3000K is required for continued production work.
200-Hour Rated Life Constraint
The filament design limits operating life to approximately 200 hours at full voltage. Users planning extended sessions should budget for frequent lamp changes and allow cool-down periods between strikes to avoid premature failure.
Highlights
- Bright 2500 lumen output for clear projection
- Warm 3000K colour temperature suits studio lighting
- 125W halogen lamp runs on standard 120V supply
- Rated 200-hour life for reliable fixture use
- Ushio 1000605 fits Lowel ViP Pro-light fixtures
Specifications
| Brand | Ushio |
|---|---|
| Type | Halogen Bulbs |
| Lumen Range | 2500 |
| Wattage | 125 |
| Color Temperature | 3000K |
| Life Time Hours | 200 |
Questions about this item
What fixture or socket does the 1000605 FSH halogen bulb fit?
The FSH lamp is used in Lowel ViP Pro-light fixtures and accepts a standard 120 V socket.
How do you install the 125 W halogen bulb without shortening its 200-hour life?
Handle the quartz envelope only with clean gloves; skin oils create hot spots that cause early failure.
When should the 2500-lumen, 3000 K halogen bulb be replaced?
Replace after roughly 200 hours of use or when output drops noticeably, as the filament degrades with each cycle.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



