Ushio
Ushio 1000420 EXV JCR12V-100W Halogen Bulb
A 12-volt, 100-watt halogen lamp rated at 3350K colour temperature with a 50-hour rated life
- TypeHalogen Bulbs
- Wattage100
- Color Temperature3350K
- Life Time Hours50
- 12 V operation suits low-voltage fixtures
- 100 W output delivers strong illumination
- 3350 K colour temperature gives warm white light
- 50-hour rated life for short-duration use
- Ushio halogen design ensures consistent output
Halogen Projector Lamp 100W 12V
The Ushio 1000420 EXV is a 100 watt halogen bulb that operates on a 12 volt supply. It produces light at a colour temperature of 3350K for projector and stage fixtures. The lamp is supplied new and carries the manufacturer part number 1000420.
Suits Fixtures Requiring EXV Coding
This lamp fits projectors and follow spots that specify the EXV JCR12V-100W designation. Buyers needing a different base type, voltage or wattage should select a lamp matched to their equipment. The rated life is 50 hours, so users expecting longer continuous runs should consider alternative technologies.
Rated 50 Hours at Full Output
At the rated 100 watts the bulb delivers its specified output for approximately 50 hours before replacement is needed. Headroom is limited to this single rating; dimming or voltage variation is not covered by the supplied data. Plan spare lamps for extended sessions or multi-day events.
Highlights
- 12 V operation suits low-voltage fixtures
- 100 W output delivers strong illumination
- 3350 K colour temperature gives warm white light
- 50-hour rated life for short-duration use
- Ushio halogen design ensures consistent output
Specifications
| Brand | Ushio |
|---|---|
| Type | Halogen Bulbs |
| Wattage | 100 |
| Color Temperature | 3350K |
| Life Time Hours | 50 |
Questions about this item
What voltage and wattage supply do I need for this 12 V 100 W halogen bulb?
It requires a 12 V power source capable of delivering 100 W.
Will this 100 W halogen lamp fit the same MR16 fixtures I use for lower-wattage bulbs?
Yes, if the fixture accepts an MR16 halogen lamp and its wiring and transformer are rated for 100 W at 12 V.
How can I confirm the bulb is operating correctly after installation?
It should produce a steady 3350 K light output immediately with no flicker.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



