Ushio
Ushio 1000362 ESP JCV120V-150WGB2 CC-2V 150W Halogen Bulb
A 150-watt halogen bulb delivering 2800 lumens at 2900K for 1000 hours of projector use
- TypeHalogen Bulbs
- Lumen Range2800
- Wattage150
- Color Temperature2900K
- Life Time Hours1000
- Bright 2800 lumen output for clear projection
- 150 watt halogen lamp delivers consistent illumination
- 2900K warm white colour temperature suits display needs
- Rated 1000 hour lifespan reduces replacement frequency
- 120 volt design fits standard projector sockets
Purpose and fit
The Ushio 1000362 ESP halogen bulb delivers 2800 lumens at 150 watts for projector and stage-lighting fixtures that accept a 120V JCV120V-150WGB2 CC-2V lamp. It suits venues needing a warm 2900K output where a 1000-hour rated life matches the maintenance schedule.
Thermals noise and power
The lamp draws 150 watts at 120 volts and converts most of that energy into heat during operation. Silent running is inherent because no fan or moving parts are present. Fixture ventilation must handle the thermal load for the full 1000-hour rating.
Included items
The package contains the single halogen bulb only; no additional accessories, adapters or software are supplied. Installation is a direct lamp swap in compatible sockets. Buyers needing dimming modules, spare lamps or alternative colour temperatures must source those separately.
Highlights
- Bright 2800 lumen output for clear projection
- 150 watt halogen lamp delivers consistent illumination
- 2900K warm white colour temperature suits display needs
- Rated 1000 hour lifespan reduces replacement frequency
- 120 volt design fits standard projector sockets
Specifications
| Brand | Ushio |
|---|---|
| Type | Halogen Bulbs |
| Lumen Range | 2800 |
| Wattage | 150 |
| Color Temperature | 2900K |
| Life Time Hours | 1000 |
Questions about this item
How do I install the Ushio 1000362 halogen bulb without shortening its 1000-hour life?
Wear clean gloves or use a lint-free cloth when handling the quartz envelope; skin oils create hot spots that cause premature failure. Ensure the fixture power is off and the socket matches the 120 V rating before inserting the bi-pin base.
What maintenance or replacement should I plan for after the rated 1000 hours?
The lamp is rated for 1000 hours at 150 W; once output drops noticeably or the filament fails, replace the entire bulb — no user-serviceable parts exist inside.
What is the first limit I will hit if I run this 150 W halogen continuously?
The 1000-hour rated life is the primary limit; continuous operation will reach that point in about six weeks, after which light output falls and the filament risks rupture.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



