We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear glass halogen bulb with metal base and filament visible inside

Ushio

Ushio 1000283 EGT JS120V-1000WC Halogen Standard Bulb

SKU CH-1GXD-YQK4M

1000 W halogen projector bulb rated at 28500 lumens, 120 V, with a 200-hour lifespan

  • TypeHalogen Bulbs
  • Lumen Range28500
  • Wattage1000W
  • Life Time Hours200
  • Voltage120V
  • High 28500 lumen output for bright projection
  • 1000 watt halogen lamp delivers intense illumination
  • 120 volt operation suits standard mains supply
  • Rated 200 hour life for studio sessions
  • Ushio model 1000283 EGT halogen bulb

Ushio 1000283 EGT halogen projector lamp

The Ushio 1000283 EGT is a 1000W halogen bulb built for 120V projector fixtures in studios and venues. It delivers 28500 lumens of continuous output for stage, film or installation work. The lamp is rated for 200 hours of service life. It suits technicians who need a direct replacement for EGT-coded sockets.

Thermal output and power draw

At 1000W the lamp converts most input power into heat, so the fixture must provide adequate ventilation. Operation is silent because there are no moving parts or ballast fans. The 120V supply draws the full rated wattage from the moment of ignition. Users should allow cool-down time before handling or relamping.

No bundled accessories or software

The package contains only the halogen bulb itself; no cables, connectors or control software are included. Installation relies entirely on the projector's existing EGT socket and power circuitry. There are no firmware updates or configuration tools to manage. Buyers who need dimming modules or spare sockets must source them separately.

Highlights

  • High 28500 lumen output for bright projection
  • 1000 watt halogen lamp delivers intense illumination
  • 120 volt operation suits standard mains supply
  • Rated 200 hour life for studio sessions
  • Ushio model 1000283 EGT halogen bulb

Specifications

BrandUshio
TypeHalogen Bulbs
Lumen Range28500
Wattage1000W
Life Time Hours200
Voltage120V

Questions about this item

How do I install the 1000W halogen bulb in my projector without shortening its 200-hour life?

Power off and cool the projector completely, then handle the quartz envelope only with clean cotton gloves — skin oils create hot spots that cause early failure. Align the base pins with the socket, press firmly until seated, and avoid over-tightening any retaining clip.

What maintenance or replacement will the EGT JS120V-1000WC need after its rated 200 hours?

The filament will reach end of life at approximately 200 hours; replace the entire bulb — no internal components are serviceable. Keep a spare 1000283 on hand so the projector can be relamped immediately when output drops below 28500 lumens.

What limit appears first when running the 120V 1000W lamp continuously?

The 200-hour rated life is the primary limit; sustained operation at full 1000W will reach this limit before thermal or voltage constraints become an issue.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.