Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00939976BTC
In stock
Ushio
Ushio 1000169 DCX 120V 750W standard bulb
A 750W 120V incandescent lamp with E26 base delivering 19500 lumens at 3200K for 25 hours
- TypeIncandescent Bulbs
- Lumen Range19500
- Wattage750
- Color Temperature3200K
- Life Time Hours25
- High 19500 lumen output for bright projection
- 3200K colour temperature suits AV environments
- 750W power rating delivers strong illumination
- 25-hour rated life for short-run applications
- E26 base fits standard projector sockets
Projector bulb with 25-hour life
The Ushio 1000169 DCX is a 750 watt incandescent lamp that runs on 120 volts and produces 19500 lumens at 3200K colour temperature. It uses a standard E26 base and a T12 envelope for audio-visual projectors. The rated operating life is 25 hours.
Suited for projection equipment needing high output
This lamp fits projectors and stage fixtures that accept a 750 watt T12 bulb with an E26 base and require 3200K light. Buyers who need longer service intervals or lower power draw should consider other lamp types because this model lasts only 25 hours.
25-hour rated life decides replacement cycle
The 25-hour lifetime is the critical figure for planning spares and maintenance schedules. A venue running shows daily will replace this bulb roughly every 25 hours of use, so stock accordingly.
Highlights
- High 19500 lumen output for bright projection
- 3200K colour temperature suits AV environments
- 750W power rating delivers strong illumination
- 25-hour rated life for short-run applications
- E26 base fits standard projector sockets
Specifications
| Brand | Ushio |
|---|---|
| Type | Incandescent Bulbs |
| Lumen Range | 19500 |
| Wattage | 750 |
| Color Temperature | 3200K |
| Life Time Hours | 25 |
Questions about this item
What base type does the Ushio 1000169 DCX bulb use for mounting?
The bulb uses an E26 screw base that fits standard medium sockets found in compatible projectors and audio-visual fixtures.
How do I install the bulb without damaging the filament?
Switch off the power, allow the fixture to cool, then screw the T12 bulb gently into the E26 socket until it seats firmly — do not overtighten.
When should I replace this 750W incandescent bulb?
Plan replacement after roughly 25 hours of operation, as the rated life is 25 hours and output drops noticeably near that point.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
