usbroway
usbroway six-way charger two-way radio 24 x 18 x 6 cm
Six-slot charger handles up to six compatible radios or batteries simultaneously with individual LED status indicators
- TypeTwo-way Radio
- Charges six radios from one socket, freeing bench space
- 500 mAh charge current with over-current and over-temperature safeguards
- Accepts 1800, 2800 and 3800 mAh packs on the same station
- Red and green LEDs show charging status for each bay
- 100-240 V input with 12 V, 8.4 V output for worldwide use
Six-Way Charging Station
The USBroway six-way charger powers up to six Baofeng UV-5R series two-way radios or their batteries simultaneously from a single mains socket. It suits teams, event crews and outdoor groups that need every handset ready at shift start.
Replaces Individual Wall Warts
One unit replaces six separate adapters, cutting cable clutter and freeing power outlets. The jump is worth it when you charge three or more radios daily and want a single status view instead of hunting for green lights on scattered bricks.
Drop-In Installation
Place each radio or bare battery into a slot; the spring-loaded contacts align automatically. Red LEDs show charging, green shows full. The only common snag is seating a thick aftermarket battery unevenly so the contacts miss — press firmly until the light lights.
Highlights
- Charges six radios from one socket, freeing bench space
- 500 mAh charge current with over-current and over-temperature safeguards
- Accepts 1800, 2800 and 3800 mAh packs on the same station
- Red and green LEDs show charging status for each bay
- 100-240 V input with 12 V, 8.4 V output for worldwide use
Specifications
| Type | Two-way Radio |
|---|
Questions about this item
What desk or shelf space does the 24 x 18 x 6 cm six-way charger require?
The unit measures 24 cm wide, 18 cm deep and 6 cm high, so allow at least that footprint plus a few centimetres around the sides for cable routing and airflow.
How do I connect the charger to mains power and what is the common mistake?
Plug the removable AC adapter into a 100-240 V socket, then insert its 12 V barrel plug into the base; the step users miss is pressing the side power button to actually start charging.
When will the six LED indicators need attention or the adapter need replacing?
LEDs are solid-state and should last the life of the charger; only replace the 12 V adapter if it fails to deliver 8.4 V at 500 mAh or shows physical damage.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
HQRP 2-Pack 10 ft 2.1mm x 5.5mm DC Power Extension Cable + Coaster
- Black



