We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with red seven-pin socket and black components

usbroway

usbroway RX23 12V 7-pin single-sided socket control box

SKU CH-YJCT-SKFHJ

Replacement control board for 12 V ride-on cars with a 7-pin single-sided socket

  • TypeCars
  • Direct replacement for 12V ride-on cars
  • 7-pin single-sided socket ensures correct fit
  • Incompatible with four-sided or A12V models
  • Remote pairing required on first use or battery change
  • Receiver mainboard restores powered wheel function

Replacement control board for 12 V ride-on cars

This WEELYE RX23 mainboard replaces the original circuit board in compatible children's electric ride-on vehicles. It is designed for models that use a 12 V power system and a single-sided 7-pin red socket. The unit is a direct hardware swap for a failed or damaged receiver board. Buyers must confirm their existing board matches this exact layout before ordering.

Verify socket type and model code before purchase

Check that the original receiver is labelled RX23 12 V and that its red socket is a single-sided 7-pin version. The four-sided 7-pin socket variant cannot be used with this board. The RX23 A12V CE FC model is a different, incompatible product. Visual comparison with the original part is essential to avoid a mismatch.

Pairing procedure required on first use

After installation or battery replacement the board must be paired with the remote control. Hold the remote's middle button for five to eight seconds until its indicator flashes, then power on the vehicle immediately. A steady indicator light confirms successful pairing. If pairing fails, replace the remote batteries and repeat the process.

Highlights

  • Direct replacement for 12V ride-on cars
  • 7-pin single-sided socket ensures correct fit
  • Incompatible with four-sided or A12V models
  • Remote pairing required on first use or battery change
  • Receiver mainboard restores powered wheel function

Specifications

TypeCars

Questions about this item

What comes in the box with the RX23 12V control box and what must I buy separately?

The box contains the RX23 12V mainboard with a 7-pin single-sided red socket. You must supply a compatible remote control and a 12 V battery pack; the four-sided 7-pin receiver will not work.

How do I confirm I need the RX23 12V version instead of the RX23 A12V CE FC version?

Check the original board: the red socket must be one-sided and the label must read RX23 12V. The A12V CE FC model is different and incompatible.

What does the 12 V rating mean when the board is installed in the ride-on car?

It means the control box is designed for a 12 V power system; pair it with a 12 V battery and matching motor so the remote pairing procedure works correctly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.