We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

usbroway

usbroway pendant light cord 16.5ft e26 e27 80w 18awg .82mm²

SKU CH-JC50-RJBYR

A 16.5 ft hemp-rope pendant cord with inline and socket switches, UL-recognised plug, 18 AWG wire rated for 80 W at 100–120 V, and E26/E27 holder

  • Connector Typetype
  • Natural hemp rope with 18 AWG wiring insulates well for safe indoor use
  • UL Recognised plug and inline switch protect against electrical faults
  • Dual switching on cord and socket lets you control light from either point
  • Supports E26 and E27 bulbs up to 80 W on 100–120 V circuits
  • 5 ft length plus four hooks enables flexible ceiling mounting without wiring

Pendant light cord 16.5 ft E26 E27

The cord is a 16.5 ft hemp rope pendant light kit with an E26 or E27 phenolic socket and an inline switch. It includes a standard plug and ceiling hooks for simple installation without wiring. The kit supports E26 and E27 base bulbs for indoor decorative lighting.

80 W 18 AWG 0.82 mm² 100 V 120 V UL Recognized

The cord uses 2 conductor 18 AWG wire rated for 80 W maximum at 100 V to 120 V. Components are UL Recognized for electrical safety. The phenolic socket provides heat resistance and insulation for long term indoor use.

Replaces hardwired fixtures for renters

This plug in kit replaces fixed ceiling lights where wiring changes are not allowed or practical. The dual switches let you operate the lamp when the wall outlet is out of reach. It is not suited for buyers who need hardwired permanent installations or outdoor rated fixtures.

Highlights

  • Natural hemp rope with 18 AWG wiring insulates well for safe indoor use
  • UL Recognised plug and inline switch protect against electrical faults
  • Dual switching on cord and socket lets you control light from either point
  • Supports E26 and E27 bulbs up to 80 W on 100–120 V circuits
  • 5 ft length plus four hooks enables flexible ceiling mounting without wiring

Specifications

Connector Typetype

Questions about this item

How do I install the 16.5ft pendant cord using the supplied hooks, and what step is often missed?

Screw the two ceiling hooks into solid ceiling material, then attach the two cord hooks to the hemp rope; the step often missed is securing both cord hooks so the 18AWG wire carries no tension.

What part of the cord set will need replacement first under normal indoor use?

The E26 or E27 phenolic socket and the inline switch are the wear items; the 18AWG conductors and hemp rope are rated for long-term service at 80W max.

At what sustained load does the 16.5ft cord hit its thermal limit?

Continuous draw at the 80W maximum on 100V–120V circuits is the design limit; exceeding it will cause the 18AWG conductors to overheat before any other component fails.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.