usbroway NEMA 14-50 Extension Cord 1.5FT

1.5FT NEMA 14-50 Extension for High-Power Loads

This 1.5FT NEMA 14-50 extension cord connects a 14-50P plug to a 14-50R receptacle for generator or RV shore-power use. It is built with STW 6AWG/3C plus 8AWG/1C stranded copper conductors rated for 50 amp continuous loading. The straight plug design inserts into generator outlets without blocking adjacent sockets. Electroplated copper terminals resist surface oxidation over repeated cycles.

Sustained 50 Amp Delivery with Copper Conductors

The 100 percent copper conductor carries the full 50 amp rating without the voltage drop seen in undersized cords. At 125 volts the assembly supports up to 7500 watts; at 250 volts it supports up to 12500 watts. The STW jacket remains flexible in cold weather while resisting oil, water and abrasion during extended outdoor runs. Heat buildup stays within safe limits because the 6AWG current-carrying wires are sized for continuous duty rather than momentary peaks.

Straight Plug and Handle Grip Simplify Hook-Up

The straight 14-50P plug slides into tight generator panels where angled plugs would collide with the housing or neighboring outlets. A molded handle on the 14-50R female end gives a firm grip for connecting and disconnecting with gloved or wet hands. Terminals are electroplated to prevent the oxidation that causes high-resistance hot spots after seasonal storage. Installers must verify that the generator or pedestal receptacle matches the 14-50 pinout; the cord does not adapt between different NEMA configurations.