We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat 7.2V 3000mAh NiMH battery pack with Tamiya connector and universal charger with adapters

usbroway

usbroway 7.2V 3000mAh NiMH Flat Battery Pack + Universal Charger 6S-10S

SKU CH-WRFZ-BA4V3

A 7.2V 3000mAh NiMH flat pack with Tamiya connector plus a universal charger supporting 6S-10S NiMH/NiCd batteries at .9A or 1.8A

  • TypeCars
  • 3000mAh capacity extends run time for RC cars and trucks
  • Flat 6-cell NiMH pack fits many Traxxas, LOSI, Team Associated, HPI, Kyosho and Tamiya models
  • Universal charger handles 7.2V, 8.4V, 9.6V, 10.8V and 12V NiMH or NiCd packs
  • Selectable 0.9A or 1.8A charge rates match pack capacity from 900mAh to 5000mAh
  • Includes standard Tamiya, mini Tamiya and alligator-clip adapters for wide compatibility

7.2 V 3000 mAh NiMH Pack with Universal Charger

This set pairs a flat six-cell nickel-metal hydride battery with a multi-voltage charger for radio-controlled cars, tanks, trucks and boats. The 3000 mAh capacity extends run time over standard packs, and the standard Tamiya connector fits many Traxxas, LOSI, Team Associated, HPI, Kyosho and Tamiya models when the compartment dimensions match.

Sustained discharge with 1.8 A charge option

The charger offers a 1.8 A quick-charge setting intended for packs between 1800 mAh and 5000 mAh, so the 3000 mAh unit can be replenished at the higher rate without exceeding the recommended range. A lower 0.9 A setting is also available for smaller packs, giving flexibility across different sessions. NiMH chemistry delivers consistent voltage through most of the discharge curve rather than a sharp drop-off.

Flat six-cell layout with Tamiya and adapter cables

The flat pack profile suits chassis compartments designed for stick-type batteries, while the included standard-to-mini Tamiya adapter and alligator-clip lead expand compatibility to airsoft guns, aircraft and other 7.2 V to 12 V NiMH or NiCd packs. The charger accepts 7.2 V, 8.4 V, 9.6 V, 10.8 V and 12 V configurations, covering six- to ten-cell series counts. Note that the charger is not suitable for lithium chemistries.

Highlights

  • 3000mAh capacity extends run time for RC cars and trucks
  • Flat 6-cell NiMH pack fits many Traxxas, LOSI, Team Associated, HPI, Kyosho and Tamiya models
  • Universal charger handles 7.2V, 8.4V, 9.6V, 10.8V and 12V NiMH or NiCd packs
  • Selectable 0.9A or 1.8A charge rates match pack capacity from 900mAh to 5000mAh
  • Includes standard Tamiya, mini Tamiya and alligator-clip adapters for wide compatibility

Specifications

TypeCars

Questions about this item

Does the 3000 mAh NiMH pack run hot or draw more power during long sessions?

The 7.2 V 3000 mAh NiMH pack is designed for extended run times in RC cars, tanks, trucks and boats without excessive heat under normal use.

What connector or adapter do I already need on my vehicle for this pack to plug in?

The pack uses a standard Tamiya connector; the included charger also supplies a mini-Tamiya adapter and alligator-clip adapter for other devices.

Will the universal charger safely handle the older 7.2 V NiCd packs I still own?

Yes, the charger supports 7.2 V to 12 V NiMH and NiCd packs and offers 0.9 A or 1.8 A charge rates selectable for capacities from 900 mAh to 5000 mAh.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.