usbroway
usbroway 25ft 18-gauge 2-conductor USB cable
A 25 ft, 18-gauge two-conductor cord with cotton-and-hemp braid for vintage-style lamp wiring
- Connector Typetype
- 25 ft length reaches distant outlets with ease
- 18-gauge pure copper conductors deliver reliable power
- 300 V rating supports standard lighting circuits
- 105 °C temperature rating handles sustained loads
- Cotton-hemp braid adds vintage style and abrasion resistance
25 ft 18-gauge vintage lighting cord
The usbroway 25 ft 18-gauge 2-conductor cord is a textile-braided wire designed for pendant lighting, table lamps, floor lamps and fans. It uses 18AWG pure copper conductors with semi-rigid PVC insulation wrapped in a cotton and hemp cloth cover. The rope styling adds a retro aesthetic while replacing worn or damaged appliance cords. Rated for 300 V and 105 °C, it suits light portable fixtures in DIY projects.
Suits decorative rewiring not data transfer
This cord fits hobbyists restoring vintage fixtures or building custom lamps who need a cloth-covered, twisted two-conductor wire. It is not a USB data cable despite the category label, so buyers wanting to connect printers, scanners or other peripherals should look for a proper USB cable with Type-A, Type-B or Type-C connectors. The construction targets line-voltage lighting circuits, not low-voltage signalling.
300 V 105 °C rating determines safe use
The single specification that decides suitability is the 300 V and 105 °C rating on the 18-gauge copper conductors. This defines the maximum voltage and temperature the insulation can handle continuously. Installers must ensure the fixture draws within these limits and that local codes permit cloth-covered flexible cord for the intended application.
Highlights
- 25 ft length reaches distant outlets with ease
- 18-gauge pure copper conductors deliver reliable power
- 300 V rating supports standard lighting circuits
- 105 °C temperature rating handles sustained loads
- Cotton-hemp braid adds vintage style and abrasion resistance
Specifications
| Connector Type | type |
|---|
Questions about this item
Does the 25 ft length reach a ceiling-mounted pendant without splicing?
Yes, the cord measures 25 ft end-to-end, giving enough slack for most ceiling drops.
How do I terminate the 18-gauge conductors safely?
Strip each conductor, twist the pure copper strands, and secure them under the lamp socket terminals — do not leave loose strands.
When should I replace the braided cover?
Replace the cord if the cotton-hemp braid frays, the PVP insulation cracks, or the copper conductors become exposed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
ID TECH IDMB-333133B credit card reader
- MagStripe Reader
- Keyboard Wedge
Brother TZES121 9mm Black on Clear Extra Strength Adhesive Tape pos accessory
- Label Accessories
- Black on Clear Indu…
Intermec E23067 DuraTran II Gloss Polyester Thermal Transfer Labels pos accessory
- Thermal Transfer Pr…
- Desktop



