We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A 100ft spool of flat grey PVC cable with two parallel conductors visible

usbroway

usbroway 100ft 22AWG 2-conductor tinned copper wire

SKU CH-4HXT-TYKJ8

A 100 ft 22 AWG two-conductor tinned copper wire with PVC insulation for low-voltage LED, automotive and audio connections up to 200 W

  • Connector Typetype
  • 100 ft length covers large LED strip runs without splicing
  • 22 AWG tinned copper strands give high conductivity and easy soldering
  • PVC jacket rated for 80 °C resists heat, moisture, acids and alkalis
  • Heat-shrink tube included for firm, insulated connections on 3014, 5050, 3528, 2535 strips
  • Suits low-voltage 5 V, 12 V, 24 V projects up to 200 W

100 ft 22 AWG tinned copper wire

This 100 ft spool of 22 AWG tinned copper wire suits hobbyists and installers who need a flexible low-voltage lead for LED strips, automotive wiring or audio connections. The stranded 2×17 construction and PVC jacket resist moisture, acid and alkali while tolerating temperatures up to 80 °C. Heat-shrink tubing is included so soldered joints can be sealed quickly. It is a new, general-purpose cable for DC circuits below 200 W.

Capacity and headroom

The two-conductor design carries 5 V, 12 V or 24 V DC loads up to 200 W, which covers typical 3014, 3528, 5050 and 2535 monochromatic LED strips and similar low-power devices. Voltage drop increases with run length, so very long strips at the upper wattage may dim noticeably. The 99.99 % copper core keeps resistance low, but the 22 AWG gauge still limits the maximum safe current for extended runs.

Build integration

Supplied on a 100 ft reel, the wire cuts and strips easily and the flat PVC sheath helps prevent leakage between conductors. Heat-shrink tubing slides over each joint before soldering, giving a tidy, insulated finish without extra parts. The cable is not rated for mains voltage, high-temperature conduit or outdoor burial, so it must stay inside low-voltage DC circuits only.

Highlights

  • 100 ft length covers large LED strip runs without splicing
  • 22 AWG tinned copper strands give high conductivity and easy soldering
  • PVC jacket rated for 80 °C resists heat, moisture, acids and alkalis
  • Heat-shrink tube included for firm, insulated connections on 3014, 5050, 3528, 2535 strips
  • Suits low-voltage 5 V, 12 V, 24 V projects up to 200 W

Specifications

Connector Typetype

Questions about this item

Will the 22AWG tinned copper conductors handle the same 12 V LED strips I already have installed?

Yes, the wire is rated for low-voltage 5, 12 V and 24 V products up to 200 W, matching typical 12 V LED strip installations.

How can I verify the 99.99 % copper conductors are making solid contact after I solder and heat-shrink the joints?

Check for a smooth, shiny solder fillet and a tight, fully recovered heat-shrink sleeve; then measure continuity and confirm the LED strips light without flicker at the rated voltage.

Does the 100 ft spool include the heat-shrinkable tubes mentioned, or must I buy them separately?

The spool comes with heat-shrinkable tubes supplied, so you can solder, shrink and seal joints without purchasing extra tubing.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.