We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black heavy-duty 100 ft extension cord with lighted ends and flat plugs

usbroway

usbroway 10 Gauge 100 ft Extension Cord 15A 125V 1875W

SKU CH-19WW-AP5PZ

A 100 ft 10-gauge extension cord rated for 15 A, 125 V and 1875 W with lighted ends and a water-resistant jacket

  • Connector Typetype
  • Handles heavy-duty loads with 10-gauge wire rated for 15 amps and 1875 watts
  • Lighted ends show power status at a glance for safer connections
  • Water-resistant SJTW jacket protects against moisture in outdoor environments
  • UL listed construction meets recognised safety standards for peace of mind
  • Triple-tap connector powers three devices from a single 100-foot run

10 Gauge 100 ft Extension Cord

This 10 gauge extension cord spans 100 ft and delivers 15 A at 125 V for up to 1875 W. It is built for heavy-duty indoor and outdoor use with a water-resistant SJTW jacket and lighted ends that show power status. The cord suits contractors and homeowners running high-draw equipment such as air conditioners or generators.

Installation and common issues

The moulded 5-15P/R plugs with strain reliefs connect directly to standard outlets and equipment cords without tools. The flat plug profile fits behind furniture or in tight receptacles. The triple-tap connector allows three devices at once, but total draw must stay within the 15 A rating. The 100 ft length adds voltage drop, so avoid coiling the cord under load to prevent heat build-up.

Capacity and headroom

The 10 gauge copper conductors handle 15 A continuously, supporting 1875 W at 125 V for appliances like air conditioners, power tools or generator hook-ups. The UL-listed, flame-resistant jacket withstands moisture and abrasion on job sites. The cord reaches its limit when combined loads exceed 15 A or when excessive length beyond 100 ft increases resistance, making it unsuitable for permanent high-current installations.

Highlights

  • Handles heavy-duty loads with 10-gauge wire rated for 15 amps and 1875 watts
  • Lighted ends show power status at a glance for safer connections
  • Water-resistant SJTW jacket protects against moisture in outdoor environments
  • UL listed construction meets recognised safety standards for peace of mind
  • Triple-tap connector powers three devices from a single 100-foot run

Specifications

Connector Typetype

Questions about this item

How do I confirm the lighted ends are glowing once I plug the 10 gauge cord into a 125V outlet?

Plug the cord into a live 125V receptacle; the neon indicators on both the plug and the triple-tap connector will illuminate immediately, showing power is present through the 10/3 SJTW conductors.

Does the box contain only the 100 ft 10/3 extension cord with moulded 5-15P/R ends, or do I need to buy a separate adapter?

The package includes the single 100 ft 10/3 SJTW cord with factory-moulded 15A-125V plug and triple-tap connector; no extra adapter is required for standard North American outlets.

Should I choose the 10 gauge 100 ft version or a thinner gauge for a 15A 1875W air conditioner?

The 10 gauge 100 ft cord is rated 15A, 125V, 1875W and UL listed, making it the correct choice for that load; a thinner gauge would not carry 15 amps safely over 100 ft.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.