We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear USB 2.0 A-to-A extension cable, 7ft, molded strain relief

USBGear

USBGear UBAMAFT-2M USB 2.0 A to A Extension Cable 7ft Clear

SKU CH-2X77-5W8AG

A 7 ft clear USB 2.0 A-to-A extension cable with 20-gauge power wires, foil-and-braid shielding and moulded strain relief for 480 Mbps data and 500 mA power delivery

  • Connector TypeUSB A to USB A
  • ColorClear
  • Length7ft
  • Extends USB devices up to 7ft with 480 Mbps data transfer
  • 20-gauge power wires deliver full 500 mA current for bus-powered drives
  • Foil-and-braid shield plus aluminium under-mould blocks EMI/RFI interference
  • Impedance-matched twisted-pair construction ensures error-free high-speed transmission
  • Molded strain relief protects connectors from repeated bending stress

What this cable does

The USBGear UBAMAFT-2M extends a USB 2.0 connection by seven feet using a male-to-male Type-A layout. It suits desktop users who need to reach a rear port from a front-panel device or reposition a hub without moving the host.

Capacity and headroom

The cable carries data at up to 480 Mbps and uses 20-gauge power conductors to deliver the full 500 mA bus-current allowance at the far end. That headroom keeps bus-powered hard drives, optical drives and media players running reliably, while longer runs or higher-current devices would exceed the spec.

Build quality and daily use

Molded strain relief and an aluminium under-mould shield protect the impedance-matched twisted pairs and foil-and-braid screening from EMI and physical stress. The clear jacket lets you inspect the wiring, and the reinforced ends resist damage from repeated insertion in tight spaces.

Highlights

  • Extends USB devices up to 7ft with 480 Mbps data transfer
  • 20-gauge power wires deliver full 500 mA current for bus-powered drives
  • Foil-and-braid shield plus aluminium under-mould blocks EMI/RFI interference
  • Impedance-matched twisted-pair construction ensures error-free high-speed transmission
  • Molded strain relief protects connectors from repeated bending stress

Specifications

BrandUSBGear
ModelUBAMAFT-2M
Connector TypeUSB A to USB A
ColorClear
Length7ft

Questions about this item

Will this 7 ft USB 2.0 A-to-A extension still deliver 500 mA to a bus-powered drive connected to an older USB 1.1 port?

The cable uses 20-gauge power wires designed to maintain the full 500 mA USB 2.0 current rating at the female end, so a bus-powered drive should receive adequate power even on a legacy USB 1.1 host.

How can I verify the link is running at the rated 480 Mbps after plugging it in?

On Windows open Device Manager, expand Universal Serial Bus controllers, right-click the hub the device is attached to, choose Properties, then the Details tab and select Speed; it should read 480 Mbps for Hi-Speed operation.

Does the clear 7 ft extension come with any adapters or do I need to buy a separate USB A male-to-micro cable for my phone?

Only the USB A male-to-USB A female extension cable is included; any additional connectors such as micro-USB or USB-C cables must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.