We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black USB 2.0 Type-A to Type-B cable, 4ft, shielded twisted-pair wiring

USBGear

USBGear AB4FT-B USB 2.0 A to B cable 4ft black

SKU CH-27SF-FTNXF

Connects USB Type-B peripherals such as printers or scanners to a host computer at up to 480 Mbps over a shielded 4 ft cable

  • Connector TypeUSB A to USB B
  • ColorBlack
  • Length4ft
  • Connects printers and scanners via USB Type-B
  • Transfers data up to 480Mbps under USB 2.0
  • Shielded 28AWG/1P+24AWG/2C wiring resists interference
  • Works with USB 1.1 and 1.0 devices for broad compatibility
  • Durable, flexible build suits daily desktop or laptop use

Cable purpose and compatibility

This USB 2.0 Type-A to Type-B cable connects laptops or desktops to printers, scanners and USB hubs. It supports USB 2.0 data rates up to 480Mbps and remains backward compatible with USB 1.1 and 1.0 devices. The four-foot length suits typical desktop arrangements. It is not for users who need USB 3.0 or higher throughput or longer reach.

Wiring construction and signal quality

The cable uses 28AWG/1P plus 24AWG/2C shielded twisted-pair wiring to meet USB 2.0 specifications. This construction helps maintain reliable 480Mbps transmission and reduces electromagnetic interference during normal use. No active electronics or external power are involved, so thermals, noise and power draw are not applicable concerns. It is not for installations that require plenum-rated or outdoor-rated jackets.

Durability and flexibility benefits

The supplier describes the cable as durable and flexible, which aids routing around desks and through cable management channels. Black PVC jacketing matches common peripheral aesthetics. No bundled software, drivers or additional accessories are included. It is not for buyers who need right-angle connectors, locking screws or a cable-management kit in the package.

Highlights

  • Connects printers and scanners via USB Type-B
  • Transfers data up to 480Mbps under USB 2.0
  • Shielded 28AWG/1P+24AWG/2C wiring resists interference
  • Works with USB 1.1 and 1.0 devices for broad compatibility
  • Durable, flexible build suits daily desktop or laptop use

Specifications

BrandUSBGear
ModelAB4FT-B
Connector TypeUSB A to USB B
ColorBlack
Length4ft

Questions about this item

How do I plug the AB4FT-B cable into my printer and computer, and which end goes where?

Connect the rectangular Type-A plug to the host USB port on your laptop or desktop and the square Type-B plug to the printer or scanner; the connectors are keyed so they only insert one way.

What part of the AB4FT-B cable is most likely to wear out first and need replacing?

The strain relief at each moulded connector end is the typical failure point; the 28AWG data pair and 24AWG power conductors inside the shielded jacket are rated for the cable's full service life.

At what length does the AB4FT-B cable hit its maximum certified data rate under continuous transfer?

The 4ft length meets USB 2.0 specification limits, so the cable sustains the full 480Mbps rate without signal degradation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.