Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00941173BTC
In stock
Usa Sealing
Usa Sealing Cam and Groove Fitting 304SS Type E 3/4in Adapter
A 3/4-inch stainless steel cam-and-groove adapter rated to 150 psi at 70 F
- ColorTransparent
- TypePipes, Valves & Fittings
- 304 stainless steel body resists corrosion
- Type E cam-and-groove adapter connects 3/4 in hose shank
- Rated to 150 psi maximum working pressure at 70 °F
- Overall length 3 11/16 in for compact installation
- Transparent finish allows visual flow inspection
304 Stainless Cam-and-Groove Adapter
This 3/4-inch Type E adapter connects a hose shank to a cam-and-groove coupling. The body is 304 stainless steel for corrosion resistance in fluid-handling applications. It suits installers who need a quick-disconnect fitting for water or compatible liquids.
Verify hose size and pressure rating
Confirm the hose inside diameter matches the 3/4-inch shank before ordering. The maximum working pressure is 150 psi at 70 F, so the system must not exceed that limit. Ensure the media is compatible with 304 stainless steel and that no locking arm is required for the connection.
Fits 3/4-inch hose assemblies
The plug outside diameter is 1 1/4 inches and overall length is 3 11/16 inches, so allow that clearance in the routing. The male hose shank inserts directly into the hose and secures with a clamp or crimp ferrule. This adapter frees the coupling side for rapid connection and disconnection during maintenance.
Highlights
- 304 stainless steel body resists corrosion
- Type E cam-and-groove adapter connects 3/4 in hose shank
- Rated to 150 psi maximum working pressure at 70 °F
- Overall length 3 11/16 in for compact installation
- Transparent finish allows visual flow inspection
Specifications
| Brand | USA INDUSTRIALS |
|---|---|
| Color | Transparent |
| Type | Pipes, Valves & Fittings |
Questions about this item
What comes in the box with the 304 stainless steel Type E adapter, and do I need to buy a hose clamp separately?
The box contains the cam-and-groove adapter only; a hose clamp or crimp ferrule for the 3/4 in hose shank must be purchased separately.
Should I choose the 3/4 in coupling or a larger size for a 3/4 in hose ID?
Select the 3/4 in coupling size because it matches the 3/4 in hose ID and the 150 psi rating at 70 F.
What does the 150 psi rating mean once the adapter is installed on a 3/4 in hose?
It is the maximum working pressure at 70 F; the system must not exceed 150 psi during operation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
